Results 1 to 6 of 6
  1. #1
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7

    Outlet question....

    Drilling the hull on the new ski today. Previously some mentioned that instead of using the 2 and 7/8" hole saw, one should use a smaller size for better fit. Any thoughts? 2 and 3/4" or 2 and 5/8". Anyone have any input on this. I searched for the post I read a few months ago but after spending the last 2 hours looking and coming up short, I figured I would ask. Thanks in advance....


  2. #2
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    Quote Originally Posted by MSRXP View Post
    Drilling the hull on the new ski today. Previously some mentioned that instead of using the 2 and 7/8" hole saw, one should use a smaller size for better fit. Any thoughts? 2 and 3/4" or 2 and 5/8". Anyone have any input on this. I searched for the post I read a few months ago but after spending the last 2 hours looking and coming up short, I figured I would ask. Thanks in advance....
    I used a 2 3/4" holesaw and than filed it alittle to get the thru hull, thru.

  3. #3
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    I have both 7/8 and 3/4. Better to go smaller yes?

  4. #4
    wettank's Avatar
    Join Date
    Mar 2011
    Location
    St Louis
    Posts
    211
    I used a 2 3/4 and filed it down a bit,fit snug.By the way used your backwards drilling advice and it work great.

  5. #5
    Everthing louder than everything else! sHALlow's Avatar
    Join Date
    Jun 2010
    Location
    Panama City, FL
    Posts
    391
    +1
    27
    thats what i remember when i was researching awhile back. any bigger gets close to bolt holes.

  6. #6
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by sHALlow View Post
    thats what i remember when i was researching awhile back. any bigger gets close to bolt holes.
    I couldn't remember which one I use on everyone's ski I have drilled. Had a moment

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. R&D Exhaust outlet question
    By r33pwrd in forum Yamaha PWC Performance (4-stroke)
    Replies: 10
    Last Post: 08-29-2012, 10:22 PM
  2. FX140 COOLING WATER PILOT OUTLET Question
    By BondJohn in forum Yamaha Open Discussion
    Replies: 2
    Last Post: 06-25-2010, 02:35 PM
  3. triple outlet pump install question
    By Hurban96 in forum Polaris How To & FAQs
    Replies: 1
    Last Post: 09-10-2009, 07:41 PM
  4. Question about Triple Outlet Fuel Pump
    By c.res.q in forum Polaris Open Discussion
    Replies: 4
    Last Post: 12-03-2008, 12:34 AM
  5. Question on upgrading to triple outlet FP
    By kyleag89 in forum Polaris Open Discussion
    Replies: 2
    Last Post: 11-27-2008, 09:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •