Results 1 to 4 of 4
  1. #1
    If i knew,...I wouldn't ask sea-one's Avatar
    Join Date
    Aug 2009
    Location
    Dallas/Waxahachie
    Posts
    2,340
    +1
    109

    I see alot of prop talk,so should i get mine done too?

    My 04 rxp motor is stock(new),i have the other mods that make it breath better,Very front air intake,catch can,riva free flow pipe(oem exit) solas 14/19r,pump cone 2.0 spacer,2.5 wedge kit,worx intake,metal washers,stock charger and free mods that most do, not that this matters but oil/boost gauges and a homecrafted individual cylinder fogging kit.
    So is my prop good with you guys,this is an area thats really grey for me.only thing i know is which way it goes on and how it must be torqued to.

    thanks for the continued education


  2. #2
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    What rpm's are you turning? If you are close to your rev limit I say leave it alone, when it gets really hot later in the summer the rpm's will go down some.

  3. #3
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Figure out what rpm's you are turning and send it to Jerry for him to make an adjustment. He did wonders for my prop. Give him your mod list and he'll know what to do with it. Like Troy said, if you are close to the rev limiter leave it alone. However, I had that exact setup and he made an adjustment and I am turning 8160 from 7820..... Just a thought....

  4. #4
    If i knew,...I wouldn't ask sea-one's Avatar
    Join Date
    Aug 2009
    Location
    Dallas/Waxahachie
    Posts
    2,340
    +1
    109
    ok guys,thanks ill get that exact rpm number and go from there..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Which one of Jim's plates should I get?
    By xray328 in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 02-19-2012, 11:34 PM
  2. Put a new prop in n lost alot of down low power??
    By ModularJunk in forum 4-Tec Performance
    Replies: 4
    Last Post: 07-27-2008, 08:43 PM
  3. Been reading alot of forums lately and was wondering what intake grate i should get?
    By 1300/2nV in forum Yamaha PWC Performance (2-stroke)
    Replies: 12
    Last Post: 05-16-2008, 06:36 PM
  4. Already seeing signs of Christmas so........
    By Jeff C in forum Sea Doo Open Discussion
    Replies: 12
    Last Post: 11-11-2006, 12:17 PM
  5. RXP Alot of Water in the hull HELP
    By Drake in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-25-2005, 02:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •