Thread: NEWB Mod Help....
05-11-2011, 10:49 PM #1
NEWB Mod Help....
Well guys as you might of heard from other postings I am picking up a X charger from the store and have 42lb Bosch injectors on there way. As of now that is it the ski is stock otherwise. What does everyone think of this mod list? 15/20R prop, riva block offs cheap ones, R&D pro 2 intake grate, 2 to 2.5 degree wedge, 4" intake and maybe exhaust but unsure of what to get free flor tru hall and waterbox. After the prop how would you say I go in order for these mods?
I will eventually do more however will realistically only acomplish these in the next 4 months. Open to suggestions thank you.
05-11-2011, 11:07 PM #2
Looks good to me. You are on the right track. Go with the through hull and waterbox. The sound it produces with that setup is pretty cool and sounds great. Fill the ride plate holes and trim the reverse bucket.
05-11-2011, 11:12 PM #3
Yeah I am doing the reverse bucket this weekend and as far as filling the ride plat holes I have looked at past posts on the post dedicated to it I just have to find the stuff to use.
05-11-2011, 11:50 PM #4
05-12-2011, 01:40 AM #5
Don't forget to tape the ride plate bolts up before putting that stuff in there.
You can get the stuff at Lowe's. Go to the plumbing section and ask for Plumber's Putty
Apply the putty forcefully into the holes smoothing off as much as you can. Let dry for an hour or so. Take a power sander (a mouse or something small and non rotary) and sand front to back and not side to side. Looks like this when you are done...
05-12-2011, 02:13 AM #6
05-12-2011, 07:32 AM #7
- Join Date
- Aug 2007
- Sparrows Point, MD (near the Key Bridge)
you might want to get a intake grate now if you plan on running the x-charger and prop
05-12-2011, 08:05 AM #8
From what I read on here I was thinking the 15/20 would be too much. I have the same mods and was going to go with a 14/19 what do you guys recommend?
05-12-2011, 11:37 AM #9
15/20 if you plan on doing an external intercooler. 14/19 if you do not.
05-12-2011, 01:21 PM #10
I'm thinking it might be a little different' from rxp to rxt. I put on a 15/20 with x charger and 42's and 4 inch intake.... ran great minimal cavitation. rpms where good 8180.every setup is different just a heads up.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Skribbles in forum Yamaha Open DiscussionReplies: 3Last Post: 03-11-2010, 09:40 PM
By YamahaPat in forum Yamaha Old School SkisReplies: 3Last Post: 09-17-2009, 04:11 PM
By ONEFASTLSX in forum Open DiscussionReplies: 6Last Post: 08-08-2009, 06:48 PM
By MachoTA in forum 2-Stroke PerformanceReplies: 2Last Post: 06-11-2009, 10:48 AM
By steach in forum Yamaha PWC Performance (2-stroke)Replies: 20Last Post: 07-04-2006, 09:07 AM