Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 34
  1. #1
    Eastside Powersports Slow 91's Avatar
    Join Date
    Sep 2008
    Location
    River Crew CT
    Posts
    4,248
    +1
    544

    BeGi Setup, you be the judge.

    If anyone is on the fence about doing the BeGi setup, or if they dont think its worth the extra cost of adding another regulator, or is totally confused at how it works let me be the one to tell you its worth everything. When trying to understand the BeGi setup, i was lost and confused until i had the regulator in my hand and talked to Speedskixp, Bigdaddy and beerdart. With all their input, it made the job and understanding very simple. Attatched is a before and after idle video. My fuel mods are:

    Walbro 255HP (GSS342) Pump ( no relay)
    -6 Russell Fuel Line
    Turbo Tech Fuel Rail
    Aeromotive Fuel Press Gauge ( mounted inlet fitting of rail, liquid filled)
    Bosch 50lbs injectors
    Aeromotive A-1000 1:1 Regulator
    Begi 2025 Regulator
    Key on pressure 55lbs
    Riva ECU (05)
    Rude3 Charger.

    Here is the video, before, without the BeGi. You can hear how crappy idle is, see the black smoke. The ski would shake pretty bad at idle on the trailer AFR 11.2 and falling:

    http://www.youtube.com/user/AWDHAZE#p/a/u/1/-ar3Z-L8ecI


    Here is After, with the BeGi all set up, AFR 13.3-13.6

    http://www.youtube.com/user/AWDHAZE#p/a/u/0/FZkGeEsb02Y


  2. #2
    Norwegian Wiking Trond's Avatar
    Join Date
    Nov 2007
    Location
    Norway, Kristiansand
    Posts
    1,456
    I dont even know the term "begi".... please explain!!

  3. #3
    Eastside Powersports Slow 91's Avatar
    Join Date
    Sep 2008
    Location
    River Crew CT
    Posts
    4,248
    +1
    544
    Its a dual reg setup, here is a good tech thread on the BeGi

    http://www.greenhulk.net/forums/show...ght=begi+setup

  4. #4
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Trond, it is a second regulator used to help adjust/tune the bottom to mid range AFR,It is used in conjunction with the your existing Regulator....

  5. #5
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77
    My ski idles fine at 11.4. No smoke or anything. My mids are 12.8 to 13.1. I realize it's not optimal but it's always ran fine.

  6. #6
    Norwegian Wiking Trond's Avatar
    Join Date
    Nov 2007
    Location
    Norway, Kristiansand
    Posts
    1,456
    Thanks man... that cleared it up pretty good

    Sounds like its working good on your engine

  7. #7
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Here is some good info posted by Mark S.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Begi fuel flow logs_0000.jpg 
Views:	93 
Size:	48.7 KB 
ID:	238614   Click image for larger version. 

Name:	Begi regulator install and test log_0001.jpg 
Views:	63 
Size:	45.2 KB 
ID:	238615   Click image for larger version. 

Name:	Begi fuel flow logs_0002.jpg 
Views:	62 
Size:	51.9 KB 
ID:	238616   Click image for larger version. 

Name:	Begi regulator install and test log_0000.jpg 
Views:	190 
Size:	96.3 KB 
ID:	238617   Click image for larger version. 

Name:	Begi fuel flow logs_0001.jpg 
Views:	60 
Size:	47.4 KB 
ID:	238619  

  8. #8
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    What's the advantages/ disadvantages against the Rude controller?

  9. #9
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Mechanical failsafe..
    Quote Originally Posted by Sayers View Post
    What's the advantages/ disadvantages against the Rude controller?

  10. #10
    Eastside Powersports Slow 91's Avatar
    Join Date
    Sep 2008
    Location
    River Crew CT
    Posts
    4,248
    +1
    544
    i plan on going with the rude controller at some point.

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. what speed do you want the learning mode to be at?
    By VTECH.SE in forum 4-Tec Performance
    Replies: 7
    Last Post: 08-05-2012, 06:22 PM
  2. how do you remove the opas
    By jonstephens in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-14-2005, 06:07 PM
  3. Can you run the IC with the stock ECU
    By Jrsrxp in forum 4-Tec Performance
    Replies: 10
    Last Post: 06-16-2005, 08:00 AM
  4. Can you use the blue hose connectors on the Power pipe also?
    By Therock in forum 4-Tec Performance
    Replies: 4
    Last Post: 06-06-2005, 02:56 PM
  5. What would be the ULTIMATE runabout?
    By 11 in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 05-10-2005, 06:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •