Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1

    Large Lot of Yamaha 2 Stroke Parts - $150 !

    I'm cleaning out the shop (again, last time). I've got a bunch of Yamaha 2 stroke parts that you can either use or sell off and make MUCH MORE than $150. I'm too busy to list everything here or take pics, but trust me, it's a super super deal. I just need some quick cash in my paypal account for something I want to buy, so this stuff can all go.
    Here is a rough idea of some of the stuff I can think of off the top of my head:

    1) At least one, maybe 2, FX-1 steering cables
    2) Some Blaster 1 exit nozzles and steering nozzles
    2) Waveblaster seat base
    3) A bunch of FX-1, Superjet, and Waveblaster seat latches and hood latches and hardware, all nicely bagged
    4) A bunch of new two cylinder Yamaha oem gaskets and orings and stuff
    5) Some 144mm pump parts I think
    6) A couple of brand new or like new Rule Bilge pumps and some switches as well
    7) Some billet fittings
    I think a couple of 61x 62T flywheels
    9) Some 61X or 62T Ebox shells I think that are in good condition
    10) Lots of hardware
    11) Two Nice low jet ski shop carts (I paid $100 just for that alone)
    12) I think at least one complete "Black" plastics for a Waveblaster 1. I sold one of the kits I had a couple years ago for $70.
    13) One, maybe two, nice complete OEM 701 Waveblaster exhaust systems.
    14) I think I have a long exaust tube for a blaster or SN Superjet. One or the other. I think I still have that. Maybe an FX-1, too.
    15) 650/701/760 bed plates
    16) 701 front cover and it might have the billet block-off
    17) A couple complete 61X OEM flame arrestors (for you freestyle guys)
    1 Two 62T oem flame arrestor
    19) GP760 waterbox
    20) Some misc aftermarket reeds
    21) Some 61x or 62t reed blocks and reeds
    22) Stock Blaster yellow handlebar pad
    .....and on and on.

    I'll go to the shop in a while and look and get a better feel for what I have. I just want it OUT and I want the CASH.
    I'll make sure the buyer isn't disappointed.

    Pick up is fine.
    I'll ship as long as you agree to pay actual S&H

    Price is FIRM at $150

  2. #2

    Join Date
    Dec 2010
    Whittier Ca
    What billet fittings do u have?? please PM me some pics....

  3. #3
    Just bilge fittings, pissers, and bow.

    Sorry, no pics.

  4. #4
    what aftermarket reeds are there? anything for gpr1200??

  5. #5
    philip_gpr's Avatar
    Join Date
    Dec 2005
    where are you located?

  6. #6
    L Carlson's Avatar
    Join Date
    Aug 2007
    Bonita Springs, Florida, United States
    Quote Originally Posted by philip_gpr View Post
    where are you located?
    30 min north of me Phillip

  7. #7
    I don't remember. Probably 2 cylinder ones.

  8. #8
    do you have any 61x metal reduction nozzles?

  9. #9
    Probably not.

  10. #10

    Join Date
    Oct 2006
    Plymouth, MA, USA
    How much for these? send pic please. "A couple complete 61X OEM flame arrestors (for you freestyle guys)

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS Some Performance Parts and a lot of Stock Parts (1200)
    By Sirhc7897 in forum Polaris Classifieds
    Replies: 21
    Last Post: 06-10-2011, 10:43 AM
  2. FS Yamaha Two Stroke Parts CHEAP
    By seatsR4toilets in forum Yamaha Classifieds
    Replies: 10
    Last Post: 03-13-2011, 09:50 PM
  3. FS lot's and lot's of parts.
    By JIM'S PERFORMANCE in forum Yamaha Classifieds
    Replies: 14
    Last Post: 08-18-2010, 01:14 PM
  4. Replies: 11
    Last Post: 07-24-2010, 09:22 AM
  5. What is considered a lot of hours for a 4 stroke?
    By codeman671 in forum Yamaha Open Discussion
    Replies: 12
    Last Post: 08-04-2009, 12:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts