Thread: gp1300r Oil Warning / Blockoff
05-16-2011, 08:35 AM #1
- Join Date
- Aug 2010
gp1300r Oil Warning / Blockoff
First time rebuilding a ski, put together everything with oil injection off. One thing, did not zip tie the floats up. Exhaust is in (for the third time) .. dont ask. Was wondering if there is a electronic bypass or something i can do without taking the exhaust off again to stop the low oil warning.
05-16-2011, 09:19 AM #2
Try to get at it from the front. You may be able to do it from that end.
05-16-2011, 12:23 PM #3
You could fabricate a jumper wire at the connector so that this mod is reversible, follow the wire from the float to the connector.
I cut the connector off of the float and soldered the wires together. The oil gauge reads full and there is no alarm.
I also pulled the oil tank, shortened the fuel tank straps, and blocked off the filler hole.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By wakejumper48 in forum 4-Tec PerformanceReplies: 19Last Post: 09-19-2010, 06:23 AM
By Adam E. in forum Yamaha ClassifiedsReplies: 2Last Post: 07-07-2010, 08:39 AM
By bigmatt in forum Polaris Open DiscussionReplies: 5Last Post: 04-24-2010, 10:27 PM
By HallPass in forum Yamaha Open DiscussionReplies: 0Last Post: 12-30-2007, 05:29 PM
By howestek in forum Yamaha PWC Performance (2-stroke)Replies: 0Last Post: 12-05-2007, 10:40 PM