Thread: gp1200 nozzle
11-28-2006, 01:46 PM #1
Does anyone know what the casting marks are on the 5 degree gp1200 venturi nozzle?
11-28-2006, 02:01 PM #2
If you look at the nozzle fom the side there is a casting mark on center that is at 5 deg.
On a 0 deg nozzle this mark is straight at 0 deg.
This may help.
11-28-2006, 02:08 PM #3
Here's a pic of mine... 65U -10
old photo, don't pay attention to the arrow!
11-28-2006, 02:32 PM #4
Side veiw of the nozzle
Last edited by BULLRAIDER; 11-28-2006 at 02:34 PM. Reason: edit
11-28-2006, 04:32 PM #5
Here's a few more. . .
Since I can't pull off my turn nozzle and measure right now, is the stock raider nozzle 86mm as well?
If so, Does anyone with a 5* want to trade for a prestine 0* nozzle
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By pilo704 in forum Yamaha ClassifiedsReplies: 15Last Post: 01-07-2010, 07:17 PM
By crashhard in forum Yamaha ClassifiedsReplies: 7Last Post: 03-01-2009, 10:25 PM
By GP12R3 in forum Yamaha ClassifiedsReplies: 5Last Post: 11-09-2008, 11:45 PM
By DONALDBUCHANAN in forum Yamaha ClassifiedsReplies: 21Last Post: 08-15-2008, 06:45 PM
By aruba yamaha in forum Yamaha Old School SkisReplies: 2Last Post: 03-04-2008, 07:11 AM