Results 1 to 6 of 6
  1. #1
    otoss's Avatar
    Join Date
    Mar 2010
    Location
    Martinique
    Posts
    712
    +1
    4

    question about minirude, need advise

    hi all,

    please look at my mod, Is it possible to put a minirude in my X charger without modification?

    How is it going to be different? acceleration mid range compare to the X charger.

    As I'm going to put all my mod in a GTX hull, wanted a little more power


    Advise will be greatly appreciated.


  2. #2
    monaroman76's Avatar
    Join Date
    Mar 2008
    Location
    Whyalla, South Australia
    Posts
    1,979
    +1
    28
    What injectors do you have? You might need a rrfpr.
    I noticed a fair decent gain in holeshot and mid range when I upgraded.

  3. #3
    MacDaddy_rxpx's Avatar
    Join Date
    Jun 2009
    Location
    Michigan
    Posts
    220
    +1
    1
    if you have 42# injectors your going to need to switch those to either 48s or 50s then I would recommend an rrfpr. To be totally safe you should install an LC-1 to read air/fuel. Kinda running blind without one.

  4. #4
    otoss's Avatar
    Join Date
    Mar 2010
    Location
    Martinique
    Posts
    712
    +1
    4
    I have 50 riva injectors. Just wanted to know if it worth the money to change it and will it go in the X supercharger or do I have to modificate it ?

    I will have to put a rrpfr with the 50 injectors?

  5. #5
    monaroman76's Avatar
    Join Date
    Mar 2008
    Location
    Whyalla, South Australia
    Posts
    1,979
    +1
    28
    Quote Originally Posted by otoss View Post
    I have 50 riva injectors. Just wanted to know if it worth the money to change it and will it go in the X supercharger or do I have to modificate it ?

    I will have to put a rrpfr with the 50 injectors?
    Yes IMO its a worthwhile upgrade for sure. Its designed to be used with a spacer and it goes straight into the x charger. You just may want to increase your slip a little.
    You would probably need the RRFPR to be safe.

  6. #6
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Quote Originally Posted by otoss View Post
    will it go in the X supercharger or do I have to modificate it ?
    Yes the impeller will fit in your X-Charger back housing with no modifications needed..the Mini Rude comes with a new impeller,Front housing and spacer....Now if your X-charger is up on hours say around 85-90 this would be a good time to rebuild it completely...If not, then i highly recommend putting in a new front Viton seal and getting a set of McMAster Carr Spring washers..These are two cheap upgrades that will help prolong the maintance on your Scer...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 1
    Last Post: 08-04-2016, 06:08 PM
  2. Questions about a RXP 155, need input please
    By fitnessguy in forum 4-Tec Performance
    Replies: 3
    Last Post: 07-07-2011, 11:43 PM
  3. Replies: 6
    Last Post: 07-06-2010, 08:38 AM
  4. need advise about intake grates.
    By otoss in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-16-2010, 09:00 PM
  5. Questions about the IC install.
    By Therock in forum 4-Tec Performance
    Replies: 3
    Last Post: 06-04-2005, 08:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •