Results 1 to 6 of 6
  1. #1

    Join Date
    Jul 2006
    Location
    Abu Dhabi
    Posts
    22

    Help with Jetting on riva set up raider

    Hi Guys
    i have just purchased a 95/96 raider 700 with a riva barrell,head all girdled and a riva pipe this ski is using stock carbs.
    can anybody help out with jetting specs and maybe water routing,i have e mailed riva a couple of times but they dont seem to want to reply.
    Thanks


  2. #2
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    Kiwi Some of the raider guys will chime in sooner or later it would help if you listed what it is currently jetted at and what issues it is having

  3. #3

    Join Date
    Jul 2006
    Location
    Abu Dhabi
    Posts
    22
    this ski runs very nasty on the botton end almost like it is running on 1 cyl but once it gets past the mid range it goes fine,so i am looking for a starting point with jetting and pop off
    thanks

  4. #4

    Join Date
    Jul 2006
    Location
    Abu Dhabi
    Posts
    22
    anyone!

  5. #5
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23
    Hopefully Darthraider and Bullraider our Raider Gurus will chime in shortly

    I sent them a PM to check this thread out

  6. #6
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    Yeah, hopefully they'll chime in. I don't know anything about the 701, but as a guess, I'd say get your popoff in the 30's, and go from there. Are your boosters dripping at idle?

    Worst case scenarrio, post on the X. All those guys run the same motor with similar mods in there superjets.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help with a Bow Stop Set Up
    By redskinVPI in forum Towing and Trailers
    Replies: 25
    Last Post: 02-17-2012, 06:13 AM
  2. Need Help with Jetting on 1200R
    By TwoStrokePotomac in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 04-28-2011, 06:30 AM
  3. Riva Rear air set up on 08 set ups ????
    By mrbtd in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-19-2010, 06:44 PM
  4. Need help with jet sizes for XLT1200
    By Chezzy in forum Yamaha PWC Performance (2-stroke)
    Replies: 6
    Last Post: 11-28-2006, 09:39 PM
  5. Need help with jetting 48 NOVIs
    By Hypertoys in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 07-07-2006, 09:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •