Results 1 to 5 of 5
  1. #1
    If i knew,...I wouldn't ask sea-one's Avatar
    Join Date
    Aug 2009
    Location
    Dallas/Waxahachie
    Posts
    2,340
    +1
    109

    RAVE valve is ticking with exhaust on a 951

    (1998 GTX 951)Yes i have rebuilt them both,the one on the MAG side ticks.took it apart looked it over to make sure it looks right.Does it have and O ring on the valve stem then install it into thre RAVE body housing then another O ring,that plastic spacer thing thats beveled on one side for the O ring and then the small spring then the screw on cap right?
    When its running and i remove the cap and its open its not as loud,but push it down and its loud


  2. #2
    get a different one and see if thats fixes your problem...

  3. #3
    Myself's Avatar
    Join Date
    May 2007
    Location
    North Central Arkansas
    Posts
    2,772
    +1
    129
    Are there any scuff marks on the end of it? If the motor has been bored and the RAVEs not clearanced, the rings will catch on them.

  4. #4

    oops

    Make sure the rubber is all the way on the valve its self. And yes there are 2 orings and a plactic spacer and should be two springs. Make sure they are cleaned real well too. And if you have had them bored twice check clearence on valves.
    Last edited by FZR76; 05-27-2011 at 01:56 PM. Reason: forgot to say something else

  5. #5
    If i knew,...I wouldn't ask sea-one's Avatar
    Join Date
    Aug 2009
    Location
    Dallas/Waxahachie
    Posts
    2,340
    +1
    109
    yea,had the pistons match to the cylinders/bored .075 and trimmed the rave edges a tad,do i need to trim more?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What is this on water box... Looks like Rave Valve?
    By dochere195 in forum 2-Stroke Performance
    Replies: 8
    Last Post: 07-28-2015, 04:02 PM
  2. Replies: 4
    Last Post: 05-22-2011, 02:15 PM
  3. rave valves on a 800 with 1mm over bore
    By hermie in forum 2-Stroke Performance
    Replies: 8
    Last Post: 10-27-2009, 05:03 PM
  4. my sho is fast with only 1 hour on it
    By racerrob333 in forum Yamaha PWC Performance (4-stroke)
    Replies: 20
    Last Post: 03-07-2008, 08:23 AM
  5. tips on adjusting rave valves 96 xp800
    By flyby9er in forum 2-Stroke Performance
    Replies: 3
    Last Post: 08-07-2007, 06:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •