05-25-2011, 08:19 PM #1
- Join Date
- May 2011
Msx 150, how to install oil tank upgraded kit??
hi... im stuck on this.. didn't come with instructions. im looking at a picture online but looks like he has a different one.. he has a air filter on his i dont.. bought.. if you have the instructions please help... thank you
05-26-2011, 03:38 AM #2
08-01-2012, 07:50 PM #3
So the hose that went to the top of the original tank that ties into the junction with the hose coming from the turbo, do I disconnect that to only have the line from the turbo going to the block alone?
08-02-2012, 10:18 AM #4
If you are talking about the small oil pressure line that goes from the rear side of the head to the top of the stock oil tank, then yes. You ditch it... not needed on the new tank.
The kit should have come with a single stack banjo bolt to replace the stock double stack banjo bolt... so you can thread the turbo oil feed line back in by itself... leaving off this line we speak of.
08-03-2012, 01:13 AM #5
It's done. Now to put the intercooler back in, body parts back on, flush the oil a few times, change the ethylene glycol someone put in this with propylene glycol and she is good to go! I hope to be on the water this weekend at some point.
08-03-2012, 09:48 AM #6
Sweet! I too am closing in on the prize. Engine's in and I'm wrapping up the last of the hoses and wiring. Gonna "break-in" my new pistons then change the oil again. And run some water through the coolant system first, then flush and fill with the pink stuff. Hope to be in the lake the weekend after next.
Keep us posted how it goes!
08-06-2012, 12:35 PM #7
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By mattsverynice in forum MSX/MatrixReplies: 5Last Post: 01-21-2014, 11:55 AM
By spannerspencer in forum MSX/MatrixReplies: 10Last Post: 06-30-2011, 04:29 AM
By Kosh in forum MSX/MatrixReplies: 3Last Post: 05-01-2011, 05:12 AM
By ManOverBoard21 in forum MSX/MatrixReplies: 5Last Post: 05-01-2010, 01:22 PM
By looking32908 in forum Polaris Open DiscussionReplies: 2Last Post: 06-16-2008, 09:23 PM