Results 1 to 2 of 2
  1. #1

    Join Date
    Aug 2009
    Location
    Charlotte, NC
    Posts
    7

    Service Bulletin for Red/Purple from CDI to Orange Terminal

    I just replaced my LR-505 (Have not tested yet) on my 2002 Virage TX and figured I would do the service bulletin that affects hot starts at the same time. I had read that this should not be needed after the 2000 models, but I seem to be having the hot start issue.

    What I found on my ski is that the red/purple and orange jumper wire is in place and plugged into the orange terminals on the board. However, the red/purple end of this jumper with the female bullet connector is not plugged to anything. The red/purple from the CDI is still connected to the red/purple Y.

    I got this ski used so I wonder if this was an incomplete repair, or because it is a 2002 does it not need to be done, but why would the jumper be there? Should I dissconnect the red/purple from the Y and connect it to the jumper?

    I could not figure out how to make the pic bigger, but hopefully you see the jumper and the Y connection to the right.


    Click image for larger version. 

Name:	IMAG0328.jpg 
Views:	72 
Size:	61.8 KB 
ID:	240492

    Greg


  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,598
    +1
    1,276
    Sounds like the previous LR module was having problems and someone changed the factory CDI power wiring to the old method. Since you have a new LR module, just move the Red/Purple CDI wire back to the Orange jumper.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 10-07-2015, 02:26 AM
  2. Replies: 0
    Last Post: 05-30-2011, 07:11 AM
  3. getting 12 volts to red /purple wire cdi with orange wire mod
    By mrjetskey in forum Polaris Open Discussion
    Replies: 2
    Last Post: 09-05-2010, 10:45 PM
  4. WTB WTB & wire harness from CDI to magneto?
    By tweeder in forum Polaris Classifieds
    Replies: 2
    Last Post: 07-24-2010, 11:39 PM
  5. Looking for a ride from plattsburgh to Baltimore
    By tibrin04 in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 08-21-2008, 07:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •