05-30-2011, 02:54 PM #1
- Join Date
- Oct 2007
Help 08 GPR cylinders filled with yamalube
After sitting all winter,would not start,pulled plugs, soaked with oil, so i cranked it a few
times without the plugs in, and oil shot out the plug holes all over my ski. After putting
some towels over the holes , and cranking it over to get excess oil out, put new plus in
but still wont start. Seems like too much fuel now, maybe from all the cranking to blow
out the oil. This must have been an ongoing prblem , but to a lesser exstent because
the first ride each spring it smoked really bad for a few minutes, but it always started.
Thanks for any help.
P.S , excess oil not from winterizing, in a heated garage, so i dont do anything to it except
siphon as much gas out as i can.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Ronn25 in forum Yamaha ClassifiedsReplies: 11Last Post: 08-25-2010, 02:35 PM
By Banchy in forum Yamaha ClassifiedsReplies: 11Last Post: 06-13-2010, 10:36 AM
By DONALDBUCHANAN in forum Yamaha ClassifiedsReplies: 36Last Post: 03-31-2010, 03:35 PM
By WATER WOODY in forum Yamaha ClassifiedsReplies: 18Last Post: 11-17-2009, 12:59 AM
By noshowallgo in forum Yamaha PWC Performance (2-stroke)Replies: 20Last Post: 08-06-2008, 12:25 PM