06-05-2011, 09:38 PM #1
- Join Date
- May 2011
Need some help with my virage 700
Ok new fuel lines,fresh rebuild on the carb new filters, compression is 125 on each cyl. Now the problem is no spark last week it ran perfect for about 3 hours then started bogging down and would not run top end would idle good and start just fine. Im thinking stator or cdi box it is an 8 pin setup im having a hard time finding the cdi and the stator figure i would replace both.
06-14-2011, 12:42 AM #2
- Join Date
- Jul 2007
- near Toronto, Canada
What year is your Virage?
Bypass the LR-505 Start/Stop module for a test.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By doc77 in forum Polaris Open DiscussionReplies: 0Last Post: 07-15-2011, 04:49 PM
By thomslik in forum Polaris SkisReplies: 1Last Post: 04-25-2009, 09:02 PM
By thomslik in forum Polaris ClassifiedsReplies: 0Last Post: 04-22-2009, 03:13 PM
By repoman in forum Polaris Open DiscussionReplies: 6Last Post: 09-08-2007, 04:07 PM
By repoman in forum Polaris Open DiscussionReplies: 2Last Post: 08-28-2007, 12:43 PM