Thread: Home made adjustable nozzle
06-12-2011, 01:28 PM #1
Home made adjustable nozzle
....just thought i would post up and see what you think
06-12-2011, 01:47 PM #2
What did you do? Modify the stock nozzle to take the Riva rings, or did you make the rings.
06-12-2011, 02:11 PM #3
06-12-2011, 02:58 PM #4
You drilled and tapped the stock nozzle and just bought the Riva rings, eh?
I like it.
06-12-2011, 03:20 PM #5
i watched this guy at work... old skool machine shop type guy....
yes stock nozzle set up and machined to take Riva ring..
06-12-2011, 03:24 PM #6
- Join Date
- Oct 2005
very nice work! let us know how it works out!
06-12-2011, 05:04 PM #7
06-12-2011, 06:04 PM #8
- Join Date
- Jul 2005
- Central North Carolina
Hydrotherapy---------One word of CAUTION on this mod. If for some reason the ring comes loose from the reduction nozzle it will cause the stearing nozzle to lock up (the set screws may not hold it secure. Just be shure the ring is secured in a way that it is impossible for the ring to come loose from the reduction nozzle. Tommy Jordan
06-12-2011, 07:15 PM #9
I did my own as well, I completely redesigned the rings so that I had 2 bolts go completely through the ring to hold it in place
06-12-2011, 07:25 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By The Bandit in forum Sea Doo How To & FAQsReplies: 114Last Post: 04-09-2015, 12:06 AM
By RX951 in forum Open DiscussionReplies: 8Last Post: 08-24-2009, 10:08 PM
By CHANDY in forum 4-Tec PerformanceReplies: 4Last Post: 06-22-2009, 04:13 PM
By bigdeez in forum 4-Tec PerformanceReplies: 36Last Post: 04-17-2008, 12:28 AM
By Rompe21 in forum Videos & PicturesReplies: 9Last Post: 09-30-2006, 07:42 PM