Results 1 to 6 of 6
  1. #1
    immred's Avatar
    Join Date
    Jul 2007
    Location
    Manassas VA
    Posts
    154
    +1
    1

    No " Drive" mode selection on 2010 RXP-X260

    I've been having problems getting the Riva S.C.O.M. module to work. I took my ski to dealer again and confirmed I do have the 3.0.3.5 cluster update installed. Now the problem seems to be I don't have a "DRIVE" mode selection so I can't do the Riva procedure for changing to sport mode before starting. I never have had a "Drive" mode selection even though my owners manual says I do.
    My mode button shitches between all the other modes listed in the manual but never displays a "DRIVE" mode.
    Does anyone else not have the "DRIVE" mode as a selection or know why I don't have it?
    I love riding my SeaDoo but everything seems to be harder than it shoud be.
    Any help would be appreciated.


  2. #2
    JT jpt7779's Avatar
    Join Date
    Jul 2008
    Location
    Pittsburg, Texas Lake Bob Sandlin
    Posts
    3,851
    +1
    742
    Try this, HOLD SET for > 3" seconds, "Driving Mode - Sport Mode" will display, HIT SET again, "Sport Mode Activated".

  3. #3
    immred's Avatar
    Join Date
    Jul 2007
    Location
    Manassas VA
    Posts
    154
    +1
    1
    That only works after the ski is running. "Driving" should come up anytime.

  4. #4
    stuckmoto's Avatar
    Join Date
    Jun 2010
    Location
    Newark, De
    Posts
    1,485
    +1
    59
    When I "wake" the ski up I can get to all the functions with the mode button,but I have to be quick about it or it times out...
    Try doing it right after you start/stop it.

  5. #5
    immred's Avatar
    Join Date
    Jul 2007
    Location
    Manassas VA
    Posts
    154
    +1
    1
    I'll try that again. All I usually get is about 2 presses before to display goes out..
    With the key on do you get the "DRIVE" display when you cycle throught the options?
    Thanks,
    Ed.

  6. #6

    Join Date
    Sep 2010
    Location
    South Florida
    Posts
    1,599
    +1
    123
    Immred,

    After I installed the Speed Control Module mine did not work either. I re-checked all wiring and everything was installed correctly. I took it to Rivas and they had to "Flash" my computer system. Took less than 5 minutes. Tested right after that and the speed limiter was removed. They advised that some ski's for some unknown reason have to have that "Flash" completed while others do not. You might want to contact Rivas service dept and discuss with them. The mechanic's name that fixed my ski was "Joe"... He's a very good water tech.

    I would also investigate why you don't have the mode "Driving" coming up on your display. Dealer should be able to answer/correct that..... Might just solve your problem...

    Hope this helps...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Only 7500 rpm on 2010 RXT-X 260 with no errors codes
    By not2fast in forum 4-Tec Performance
    Replies: 16
    Last Post: 08-03-2015, 08:14 PM
  2. ET on a RXP X260
    By BlackHawk in forum 4-Tec Performance
    Replies: 16
    Last Post: 06-23-2013, 07:52 PM
  3. CDN Pricing on 2010 Waverunners ???
    By Caper in forum Yamaha PWC Performance (4-stroke)
    Replies: 2
    Last Post: 09-11-2009, 04:17 PM
  4. model no. of the k&n filter on riva's performance power filter???
    By pwcbabe in forum Kawasaki PWC Performance (4-stroke)
    Replies: 1
    Last Post: 02-28-2009, 10:32 PM
  5. No water coming outta left pisser on 01 xl800?
    By jarrod_bridges2000 in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 08-06-2008, 09:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •