Thread: Anybody got a pin for the trim?
06-19-2011, 09:27 AM #1
Anybody got a pin for the trim?
Looking over my skis today, and I noticed my trim connection wasn't connected anymore. It would appear the pin fell out, and so the spring and pin both disappeared.
I see the pin is no longer supplied by Polaris, but the spring is.
Anyone have these parts out of a ski they're parting out? Or suggestions for substitutes? I'm guessing I could determine the size of the pin based on the hole thru the shaft, and the length of the pin would be cut such that it fits into the recess on the plastic cam. Sound good?
Items 23 and 24
06-19-2011, 09:28 AM #2
just go get a roll pin from a hardware shop
you race wera?
06-19-2011, 09:34 AM #3
Used to race WERA, CCS Northeast, ASRA, and AMA when they had the Pro Thunder (Pro Blunder) class...
I haven't seen stainless roll pins, that's why I was debating cutting a piece of stainless stock.
06-19-2011, 11:47 AM #4
- Join Date
- Sep 2006
Find a real Hardware store (not Home Depot!) and they should have it. My local ACE has a pretty good selection of stainless.
06-19-2011, 06:13 PM #5
06-20-2011, 07:08 AM #6
KJ, thanks for the offer, but I only need the little pin and spring, and the pin in the older models is different.
I'll see what I can find locally.
06-21-2011, 05:36 PM #7
could you tap the hole run a SS machine scew through it then cut the head off bam no more falling out
06-21-2011, 09:32 PM #8
- Join Date
- Jun 2011
- Holt, MI
i used a stainless steel cotter pin works great
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jcc011185 in forum Polaris ClassifiedsReplies: 4Last Post: 04-30-2012, 07:12 AM
By dalepatter in forum Polaris Open DiscussionReplies: 4Last Post: 06-23-2011, 10:06 AM
By lolzer in forum 4-Tec PerformanceReplies: 10Last Post: 09-10-2010, 05:54 PM
By mccann316 in forum Polaris Open DiscussionReplies: 7Last Post: 06-09-2010, 11:32 PM
By sic fish in forum Yamaha How To & FAQsReplies: 3Last Post: 01-16-2007, 08:41 PM