Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1

    2001 seadoo rx whine in pump

    Hey guys I have 2001 seadoo rx and bout a couple weeks ago i lost the pumpcone and everything inside of it so i replaces the cone, o ring, and the things inside. But when i lost the cone i had a whine noise it wasnt very loud but it concerned me. after replacing it i still had a whine this last weekend and there is oil in the cone. is this something that i should be concerned about or not.

    Thank You


  2. #2
    RumRunnerRon's Avatar
    Join Date
    Mar 2010
    Location
    Portland, Oregon
    Posts
    462
    What do you mean by lost the cone?

  3. #3
    when i changed oil at the end of the season i didnt put loctite on the bolts so they raddled out the back while i was riding

  4. #4
    If i knew,...I wouldn't ask sea-one's Avatar
    Join Date
    Aug 2009
    Location
    Dallas/Waxahachie
    Posts
    2,340
    +1
    109
    When you say replaced things inside, i hope your speaking of a pump rebuild with new bearings and such because you rode it in water without oil when it fell off(which is weird) so if just replaced the $30 or parts and not the bearings,THATS whats wrong...

  5. #5
    i replaced the pump come, the o ring, and all the parts inside of the pump cone

  6. #6
    If i knew,...I wouldn't ask sea-one's Avatar
    Join Date
    Aug 2009
    Location
    Dallas/Waxahachie
    Posts
    2,340
    +1
    109
    OK so no pump bearings then,.Thats what you gotta do then and hope you dont need that expensive shaft too, i recommend a complete rebuild sir

  7. #7
    ok thanks but whats the noise is it the whole bearing spinning in there or what

  8. #8
    If i knew,...I wouldn't ask sea-one's Avatar
    Join Date
    Aug 2009
    Location
    Dallas/Waxahachie
    Posts
    2,340
    +1
    109
    The your bearing are junk as that pump was churing 7k+ rpms for who knows how long with no oil,and the only lubrication(if you call it that)was water! at idle or not running.That pump is the plastic junk one anyway,find a 951 Brass stator one complete from a 98,99 gsx or gtx ltd ski and use your prop. im sure someone got one here..

  9. #9
    how much is a whole rebuild kit?

  10. #10
    If i knew,...I wouldn't ask sea-one's Avatar
    Join Date
    Aug 2009
    Location
    Dallas/Waxahachie
    Posts
    2,340
    +1
    109
    get a used brass one

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS 2001 Seadoo RX w/mods in NJ $3,500, Complete RXX hull/pipes available too
    By njrealtor55 in forum Sea Doo 2 Stroke Skis
    Replies: 2
    Last Post: 11-07-2014, 07:29 AM
  2. 2001 seadoo rx whine in pump
    By 12rxp in forum 2-Stroke Performance
    Replies: 2
    Last Post: 06-20-2011, 03:22 PM
  3. 2001 seadoo rx mods
    By 12rxp in forum 2-Stroke Performance
    Replies: 1
    Last Post: 11-01-2010, 08:18 AM
  4. 2001 Seadoo Rx
    By gtile04 in forum 2-Stroke Performance
    Replies: 2
    Last Post: 02-15-2010, 07:01 AM
  5. 2001 Seadoo RX Carb - Minneapolis - $3450.00
    By tchies in forum Sea Doo 2 Stroke Skis
    Replies: 0
    Last Post: 05-20-2009, 08:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •