Thread: 2011 RXT-X adj steering..
06-21-2011, 09:17 PM #1
2011 RXT-X adj steering..
Hello all long time lurker, first time posting..
just recently purchased a 2011 RXT-X..
I was curious if anyone is having issues with the ergo-adjustments , my bars keep twisting to minium. no matter how hard i tighten the screws.
is there something i can do to stop the bars from changing the adjustment?
06-22-2011, 07:50 AM #2
No problems. Are you tightening the larger (8mm) screws in the main stem/column? They take I think a 5 or 6mm allen key and are on the top and bottom. Check the bottom ones especially, mine fell out. The smaller 5mm screws in black plastic (take a 4mm (?) allen key) that hold the brake and throttle don't do anything for that...
06-23-2011, 02:38 PM #3
I tightened everything on the steering column whether it needed it or not..
what i noticed when re-adjusting the wrist angle back to factory, is after the screws were loose.. if you pull them out to make them wider that they actually get tighter, like the bar is tapered inside. moved everything back to the factory posistion and you can feel a wiggle in the bar when slid in. but slide it out to setting 5 its tight with out touching the screws.. its going to the dealer next week for its 10-30 hour mait.. i'll have them look at it..
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By allmotrek24 in forum Kawasaki PWC Performance (4-stroke)Replies: 1Last Post: 07-25-2011, 11:03 AM
By nlpnrxt1 in forum 4-Tec PerformanceReplies: 4Last Post: 07-17-2011, 12:07 PM
By PWC_FUN in forum Open DiscussionReplies: 19Last Post: 06-16-2011, 12:47 PM
By mazdaspd96 in forum Sea Doo Open DiscussionReplies: 2Last Post: 05-08-2011, 07:18 PM
By RUSTYSKI in forum Sea Doo Open DiscussionReplies: 3Last Post: 04-08-2011, 09:03 AM