Results 1 to 9 of 9
  1. #1

    Join Date
    Jun 2011
    Location
    new england
    Posts
    9

    2003 Polaris Genesis i - fuse blowing when Bilge button is pressed

    Hi,

    I have a 2003 Polaris Genesis i

    what is happening is when I press the bilge pump button it blows the battery fuse even when the bilge pump is disconnected.

    Also the reverse and forward controls donít work at all.

    Also the engine starts up fine. Any help would be greatly appreciated


  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,584
    +1
    1,272
    Welcome

    Which fuse is blowing?
    The 15 Amp 'Battery' fuse or the 3 Amp 'Bilge' fuse?

    Have you checked all four fuses?
    Make sure the correct rated fuse is installed in each location.

    Battery fuse is 15 Amps
    (15 Amp 'spare' fuse located in between)
    Fuel Pump fuse is 15 Amps

    Bilge fuse is 3 Amps
    (There may be a 'spare' 3 Amp fuse installed in between the Bilge and MFI fuses)
    MFI display fuse is 2 Amps

    Has the factory wiring been modified at all?
    Damaged or repaired?

    You may need to bypass the LR-503 Start/Stop module for a test, but first make sure all the fuses are the correct Amp ratings and are installed in the correct locations.

  3. #3

    Join Date
    Jun 2011
    Location
    new england
    Posts
    9
    all the fuses are correct and it is blowing the 15 amp battery fuse the wiring should be fine i bought it brand new and have never done anything to it.

  4. #4
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,584
    +1
    1,272
    Unplug the LR-503 module.

    Does the fuse no longer blow when you press the Bilge button?

  5. #5

    Join Date
    Jun 2011
    Location
    new england
    Posts
    9
    let me go try that i need to get a fuse so it might like me like an hour or so

  6. #6

    Join Date
    Jun 2011
    Location
    new england
    Posts
    9
    do you posibly have a picture and or location of the lr-503

  7. #7

    Join Date
    Jun 2011
    Location
    new england
    Posts
    9
    Sorry nevermind i unpluged it and both the bilge and reverse work now

  8. #8
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,584
    +1
    1,272
    Quote Originally Posted by motoxxace View Post
    ... I unplugged it and both the bilge and reverse work now
    Good.

    Now you just need a replacement LR-503 module.

  9. #9

    Join Date
    Jun 2011
    Location
    new england
    Posts
    9
    Thanks for all the help man you just saved me a ton of money

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2003 Polaris Genesis i 1200 starting issue
    By madison in forum Polaris How To & FAQs
    Replies: 7
    Last Post: 10-12-2011, 09:43 PM
  2. 2003 Polaris Genesis won't start.
    By toothtech in forum Polaris How To & FAQs
    Replies: 4
    Last Post: 09-13-2009, 08:45 PM
  3. 2003 Polaris Genesis I starter or solenoid problem?
    By pat in forum Polaris PWC Performance
    Replies: 5
    Last Post: 08-06-2009, 08:02 AM
  4. wtb 2003 Polaris Genesis EMM
    By polarisbuyer in forum Polaris Classifieds
    Replies: 0
    Last Post: 07-20-2009, 02:04 PM
  5. 2003 Polaris/140 reversed battery, blowing fuses
    By water_rat_pwc in forum MSX/Matrix
    Replies: 35
    Last Post: 07-18-2008, 09:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •