Results 1 to 2 of 2

Thread: bilge problems

  1. #1

    bilge problems

    I have water coming in under the seat and one of the two bilge tubes lets water in instead of draining out. What do you do in this case?

  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    near Toronto, Canada

    Water is coming in where exactly?

    The bilge siphon hoses should each have a plastic elbow in the middle. The elbows must be mounted up high in the hull in order to prevent water from back flowing into the hull when the engine is off. So each siphon hose must loop up high to the elbow, then the end with the mesh intake screen must be located low in the hull near the rear.

    Also, each siphon elbow has a small hole in the side. That hole must be kept clear, but do not enlarge the hole.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Two Problems: SL780 trim & bilge...
    By JGringo in forum Polaris How To & FAQs
    Replies: 20
    Last Post: 06-07-2011, 08:54 PM
  2. Problems problems problems seadoo 97 gsx!
    By Itowpolarismatrix in forum 2-Stroke Performance
    Replies: 5
    Last Post: 07-03-2010, 03:53 PM
  3. FS Problems problems problems seadoo 97 gsx!
    By Itowpolarismatrix in forum Sea Doo 2 Stroke Skis
    Replies: 0
    Last Post: 07-01-2010, 07:15 PM
  4. XP Bilge pump ?
    By SeanJ in forum 2-Stroke Performance
    Replies: 13
    Last Post: 04-26-2010, 02:50 PM
  5. This Bilge?
    By ReDevilRXP in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 02-27-2007, 03:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts