Thread: fuel settings
06-28-2011, 04:44 AM #1
hi guys i have an fzs 09 with the following parts . e1 charger wheel r3 reflash watercooled supercharger inlet upgrade r&d twin prop rd powercooler riva waterbox riva thr exhaust riva fuel pressure regulator engine cooling upgrade would i need a powershot and any idea on settings ? and does the fuel pressure reg have to be set on rising rate many thanks!!!! jay.
06-28-2011, 08:01 PM #2
i would start out with 52 lbs of fuel pressure @ rising rate with a E1 or a C5 wheel.
you need to run it with a AFR GAUGE. you want you afr to be 11.7 to 12.0
others would be more knowledgeable than me.
look for advice from hitman and/or 305coco.
06-28-2011, 08:23 PM #3
one thing I have always read and took advice from was start rich. So go for something like 55-58 and work your way down. Its better to be rich than lean.
06-28-2011, 08:55 PM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By scorp jr in forum Polaris Open DiscussionReplies: 8Last Post: 05-09-2010, 04:28 PM
By Pistonwash in forum Yamaha PWC Performance (2-stroke)Replies: 5Last Post: 02-19-2009, 10:51 AM
By northern irish 250 ultra in forum Kawasaki PWC Performance (4-stroke)Replies: 3Last Post: 09-24-2008, 09:01 AM
By gerhand44 in forum Polaris Open DiscussionReplies: 6Last Post: 04-08-2007, 10:08 AM
By VegasRatt in forum Polaris Open DiscussionReplies: 6Last Post: 09-22-2006, 12:02 AM