I had the carbs on my 1999 spx rebuilt at jet ski solutions.i as told that as long as the watercraft is stock that i could just bolt them on and go.i was
told that i may have to adjust the idle.the watercraft will not take full thr
ottle for quite some time,seems to run rough when first started until it completely warms up.i always go easy until it starts to warm up but it seems
a lot different than before.i also seems to be using a lot of fuel,and when i idle in to shore it will stall.i was told there was no adjustment on the high
speed and the initial setting on the low speed is 1 1/2 turns.i also changed it
over to the primer setup and they deleted the choke system.
Any help would be appreciated,george