need a coupler for my 787 hx, noticed a 3d rfi has a 787 pto but with the style of a 951 coupler with the bolt on coupler. can either have the spline type coupler or the finger type coupler that the 787 xp has. Just wondering if this 3d rfi coupler is the same dimensions as the 97 xp coupler, just 2 pieces. don't want to just order one and find out the hard way.
also don't want to get one when my mount adapter plates were made with the 97 xp coupler on the crank. reason im not using the 97 coupler is it has a bad groove where the rear seal sits. it was just used for mock up to get the motor in position to make my mount adapter plates. any help is appreciated.