Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 21
  1. #1
    WBoulton's Avatar
    Join Date
    Mar 2010
    Location
    doylestown PA, sea isle city, nj
    Posts
    569
    +1
    1

    bailer system on an 07 rxp

    last weekend my ski was filling up with water and I'm tryin to figure what happened. I was working on it yesterday and found one of the bailer tubes was off. I don't know if I pulled it off when i was pulling my charger out or if this was the reason it was taking on water. I hooked it all back up yesterday and tested it on the trailer in the water. at idle or even reving it up a little these lines are pumping up with water. It doesn't look like it's dumping water in the hull. theirs still a little water in it and I can't tell if it's filling up with more. I know if I pop off one of these lines off by the yellow 90 degree fitting it starts pumping water in like crazy. I thought these lines were suppose to have vaccum when the ski was running?
    any help would be great.
    thanks Bill


  2. #2
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2
    Have a look @ the hose under the exhaust outlet and make sure it hasnt come loose. Also look under the manifold. Some of that has to be removed to do the S/C change.

  3. #3
    WBoulton's Avatar
    Join Date
    Mar 2010
    Location
    doylestown PA, sea isle city, nj
    Posts
    569
    +1
    1
    I checked the exhaust, cooling lines, and carbon seal. their all in good shape no leaks.

  4. #4
    the system pulls out any water when the ski is in the water running and moving along. were the hoses and check valves ever been taken apart? the 90* pieces are supposed to be up high, not laying low in the hull. this could cause some water to back track, but the check valves should prevent any water intrusion...

  5. #5
    WBoulton's Avatar
    Join Date
    Mar 2010
    Location
    doylestown PA, sea isle city, nj
    Posts
    569
    +1
    1
    I've never taken them apart, I did just have the pump apart. I'm wondering if I dropped one of the o rings and it's causing this. I took the back off and ran one of the lines out to the side. the water sprays outta the line like one of the pissers on a yamalog. the more gas I give it the more it sprays. I never got up on plain, just to about 4000rpm. the lines are zip tied up to the exhaust hose, so yes there high.

  6. #6
    you might have to back track and check your work. with the seal around the pump I don`t see how the siphon could be pressurized, but if the little o rings are gone it could be water that is just in the pump area being forced in, weird...unless the restrictor washer and the o rings are out of place.

  7. #7
    WBoulton's Avatar
    Join Date
    Mar 2010
    Location
    doylestown PA, sea isle city, nj
    Posts
    569
    +1
    1
    I'll pull the pump tonight and double check everything.

  8. #8
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2
    Are the 2 siphon tubes in the nozzle still there ?

  9. #9
    Quote Originally Posted by mrbtd View Post
    Are the 2 siphon tubes in the nozzle still there ?
    yeah, that would help...lol.. then the water pressure would push the hoses off...

  10. #10
    WBoulton's Avatar
    Join Date
    Mar 2010
    Location
    doylestown PA, sea isle city, nj
    Posts
    569
    +1
    1
    no, theirs just two holes coming outta the nozzle. is their suppose to be two tubes coming outta those holes, because that would make sense to me.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 9
    Last Post: 08-25-2011, 10:09 AM
  2. 255 supercharger on an 07 rxp 215; possible?
    By fastlane in forum 4-Tec Performance
    Replies: 3
    Last Post: 08-02-2011, 02:11 PM
  3. what do i need to run a x charger on an 07 rxp stock ecu?
    By bksbigboy69 in forum 4-Tec Performance
    Replies: 3
    Last Post: 07-27-2011, 09:09 AM
  4. On the Fence about picking up an 07 RXP
    By Jerry D in forum 4-Tec Performance
    Replies: 10
    Last Post: 04-18-2008, 09:01 PM
  5. will the rxpx handle bar system work on a 07 rxp?
    By 007rxp in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 12-01-2007, 05:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •