Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16
  1. #1
    98gsxl951's Avatar
    Join Date
    Jul 2008
    Location
    On my ski, on the CT river
    Posts
    879
    +1
    3

    Anyone use west system 101 repair kit for hull repair?

    comes with 105 resin, 205 hardner, 406 filler? also got some 410 filler. anyone use it? need to redo a 4"x4" area where i hit a log with my 09 rxpx.


  2. #2
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    I have never used it. I have used the gelcoat.ca repair kits. It comes color matched to your hull as they supply seadoo with their gel coats. Great kit and it comes with everything you need for 34.95.

  3. #3
    98gsxl951's Avatar
    Join Date
    Jul 2008
    Location
    On my ski, on the CT river
    Posts
    879
    +1
    3
    i know, but i got the long weekend coming up. we are riding sat to monday, and need to get this done stat. i plan to redo the entire hull of the winter, but right now need something to seal up exposed area.

  4. #4
    98gsxl951's Avatar
    Join Date
    Jul 2008
    Location
    On my ski, on the CT river
    Posts
    879
    +1
    3
    http://www.westsystem.com/ss/105-system-kits this is what i got plus some filler

  5. #5
    mac_man_luke's Avatar
    Join Date
    Sep 2010
    Location
    South Australia
    Posts
    1,262
    +1
    22
    should work fine, west system is good gear.

  6. #6
    98gsxl951's Avatar
    Join Date
    Jul 2008
    Location
    On my ski, on the CT river
    Posts
    879
    +1
    3
    fug, so i get to my cousins today and the part that i need to redo is still seeping water. decided to drill a 1/8 hole in the area that i was going be re doing and water starts to come out... awesome. so i drilled a hole in the keel and started to blow compressed air into the hole got as much water out as a i could, got the hull up as far as i could on trailer used a heat gun to dry the area up and put the 1st layer of resin on.. will report back tomorrow when i start the other part.

  7. #7
    mac_man_luke's Avatar
    Join Date
    Sep 2010
    Location
    South Australia
    Posts
    1,262
    +1
    22
    Sounds like you have delaminated the glass? might need more than resin...

  8. #8
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    This is what happens if it not repaired correctly.


  9. #9
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2
    May want to talk to your insurance company.

  10. #10
    mac_man_luke's Avatar
    Join Date
    Sep 2010
    Location
    South Australia
    Posts
    1,262
    +1
    22
    yikes! thats stuffed

    Id say you really need to pull the motor and flip it to repair it properly

    or claim on your insurance and let it be written off...

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Anyone using the E-T water cooler for superchargers?
    By skigolfnut in forum 4-Tec Performance
    Replies: 11
    Last Post: 02-04-2013, 10:06 PM
  2. Anyone use the R&D thermostat kit?
    By Vman in forum 4-Tec Performance
    Replies: 3
    Last Post: 01-30-2013, 11:13 AM
  3. Anyone used the Free Flow exhaust kit on the RTX-X 260?
    By Rutcutter in forum 4-Tec Performance
    Replies: 1
    Last Post: 03-30-2011, 09:50 AM
  4. anyone using the girdle kit on the RD intake grate?
    By dav_dman in forum 4-Tec Performance
    Replies: 13
    Last Post: 06-24-2009, 08:05 AM
  5. Anyone use Riva splash shield for GPR carbs?
    By LT1GMC in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 10-02-2007, 01:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •