Thread: XX Charger Question
07-03-2011, 10:50 PM #1
XX Charger Question
If I get a XX charger I see it says a certain boost at 8100. will I still need a aftermarket ecu or can I just use a RRFPR and some 50s?
07-04-2011, 03:09 AM #2
07-04-2011, 04:33 AM #3
07-04-2011, 04:45 AM #4
How drastic are the inertia pull shots and hole shots going from stock Xcharger to this?
07-04-2011, 04:58 AM #5
had no chance to try it with stock ecu, but it works great with aftermarket one with 8600 rpm limit
07-04-2011, 09:10 AM #6
On a stock 05 ECU you will need to regulate the fuel..You will be pig rich in the lower RPM range with the stock ECU/50s..You can use a RRFPR to help get the upper RPMs dialed in BUT You will also need a Begi or fuel Controller to help down low with your AFRs..
07-04-2011, 06:45 PM #7
- Join Date
- Aug 2005
- S.E. Michigan
I have a 4" front intake and 42 pound injectors. My S3 supercharger had a bearing frreeze destroying it. I would like to replace it with the X charger but i don't really want to go to a RRFP
R or other than my stock ECU. Can I do it? Thanks in advance.
07-12-2011, 07:29 PM #8
07-12-2011, 07:31 PM #9
07-12-2011, 09:16 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By MSRXP in forum 4-Tec PerformanceReplies: 21Last Post: 11-21-2010, 09:43 AM
By race24x in forum 4-Tec PerformanceReplies: 10Last Post: 09-01-2010, 12:43 PM
By breon in forum 4-Tec PerformanceReplies: 5Last Post: 10-07-2009, 09:22 PM
By fh23rxp-x in forum 4-Tec PerformanceReplies: 9Last Post: 07-16-2009, 03:26 PM
By BAYOU FZR in forum 4-Tec PerformanceReplies: 5Last Post: 05-12-2009, 08:03 AM