Page 1 of 9 1 2 3 ... LastLast
Results 1 to 10 of 81
  1. #1

    Pro Cdi questions

    Does the coil have to be wired black \white to CDI ? or can you use the black My bullet connectors will have to be replaced if I go the way it's listed here
    http://www.greenhulk.net/forums/show...t=15438&page=2

    Also does anybody know why I would have a gray wire but no Tan for the temp from the CDI? I'm thinking they switched color's? it's a 97 pro CDI! Thanks scott


  2. #2
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Quote Originally Posted by ZMANN View Post
    Does the coil have to be wired black \white to CDI ? or can you use the black My bullet connectors will have to be replaced if I go the way it's listed here
    http://www.greenhulk.net/forums/show...t=15438&page=2

    Also does anybody know why I would have a gray wire but no Tan for the temp from the CDI? I'm thinking they switched color's? it's a 97 pro CDI! Thanks scott
    I would wire it like PH2O
    I then seperated the wires from the coil pack and wired with individual pig tails as follows.
    Black/Green from CDI to Black/White on PTO Coil
    Black/Orange from CDI to Black/White on Center Coil
    Black/White from CDI to Black/White on MAG Coil
    Black from CDI to Black from Coil Grounds.


    Yes the grey wire is tan as this through me for a loop also.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	prowiredia.jpg 
Views:	68 
Size:	708.3 KB 
ID:	12056   Click image for larger version. 

Name:	750elecscm.jpg 
Views:	70 
Size:	681.2 KB 
ID:	12057  

  3. #3
    OK The Gray is Tan= Cool! I just don't want to cut all 6 leads off of my coils if it doesn't know the difference? they just have the male females reversed from what would be easy! does the fact that you actually have a dedicated lead to each coil mean that you actually have a firing order know? instead of all three at the same time? Thanks dart! Z

  4. #4
    It will run if you plug them together But it just not right, I made 6 short jumper wires, 3 with male ends and 3 with female plugs. I didnt want to cut my wires.

  5. #5
    Well here is my deal I can connect them all separately just my connectors are set up to go Black and color to black on coil not black and white on coil a little different than the below suggestion
    so I guess I need to know if the coil cares?

    Black/Green from CDI to Black/White on PTO Coil
    Black/Orange from CDI to Black/White on Center Coil

    Black/White from CDI to Black/White on MAG Coil
    Black from CDI to Black from Coil Grounds.


  6. #6
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Yes it makes a differance the black/white is connected the the primary and the secondary coils and the black is only connected to the primary
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	prowirediacoil.jpg 
Views:	70 
Size:	50.8 KB 
ID:	12068  

  7. #7
    Cool! That makes it crystal clear Thanks

  8. #8
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    .
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	prowirediazook.jpg 
Views:	69 
Size:	270.4 KB 
ID:	12077  

  9. #9
    Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  10. #10
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    Damn, I missed all the fun!!!
    Last edited by ph2ocraft; 12-11-2006 at 12:48 AM.

Page 1 of 9 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need to know... stock Sl780 coil wiring... After removing the pro cdi...
    By jcc011185 in forum Polaris PWC Performance
    Replies: 10
    Last Post: 12-01-2006, 04:51 PM
  2. Pro CDI
    By BigDaddyPT in forum Polaris How To & FAQs
    Replies: 20
    Last Post: 11-16-2006, 02:25 AM
  3. Pro CDI hook up?
    By xlint89 in forum Polaris How To & FAQs
    Replies: 1
    Last Post: 11-06-2006, 02:22 AM
  4. Pro 785 questions
    By addicted in forum Polaris Open Discussion
    Replies: 13
    Last Post: 10-24-2006, 05:49 PM
  5. pro 785 questions \ help needed
    By [email protected] in forum Polaris PWC Performance
    Replies: 14
    Last Post: 09-13-2006, 08:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •