Results 1 to 10 of 10
  1. #1

    Wedge only, Do I need anything else?

    I purchased a 2 degree Riva wedge used, and it only comes with the wedge. What will I need to do to install it? Can it be installed buy only purchasing longer bolts, And adjusting the steering?


  2. #2
    Longer bolts come with it i also got the ext rod so the trim would go all the way down..

  3. #3

    Join Date
    May 2011
    Location
    Melbourne, Australia
    Posts
    258
    +1
    14
    I have the same problem. Brought one second hand off here and it did not come with bolts and steering adapter.

    I found out from one of the boys at Riva that we need 2 of 8mm x 50mm hex head cap screws and 1 8mm x 30mm hex head cap screw. Thats easy enough.

    Does anyone know if I am still going to be able to get this fitted? Im just concerned about the spacer and also the steering extension? The seller has told me they didnt need that?

  4. #4
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Think the spacer and M8x30 is only for early RXT models with the pump support bracket. you might just have enough adjustment in your steering to get away with not having the small extension that comes with the kit?

  5. #5
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Here's the instructions, they are in the GH "How To" section.

    http://www.rivaracing.com/instructions/rs23050.pdf

  6. #6

    Join Date
    May 2011
    Location
    Melbourne, Australia
    Posts
    258
    +1
    14
    Good man. Thanks mate.

  7. #7
    suck my wake's Avatar
    Join Date
    Apr 2006
    Location
    Sugar Grove IL
    Posts
    2,872
    +1
    12
    You do not need the longer vts rod to run the wedge, your trim settings are just going to be lower than before for max speed and you can adjust the steering cable in the front and rear to compensate for the missing steering part.

  8. #8
    mikelytle1077's Avatar
    Join Date
    Sep 2010
    Location
    frisco, tx
    Posts
    955
    +1
    37
    Quote Originally Posted by suck my wake View Post
    You do not need the longer vts rod to run the wedge, your trim settings are just going to be lower than before for max speed and you can adjust the steering cable in the front and rear to compensate for the missing steering part.
    i have one too that i want to put on but dont have the steering ext. how do you adjust it up front thanks ?

  9. #9
    Quote Originally Posted by mikelytle1077 View Post
    i have one too that i want to put on but dont have the steering ext. how do you adjust it up front thanks ?
    I need to know the same thing...Thanks

  10. #10
    b_dolla44's Avatar
    Join Date
    Apr 2008
    Location
    Noblesville, Indiana United States
    Posts
    1,165
    +1
    15
    You will most likely have enoungh to adjust it in the rear

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. do i need bigger injectors? or anything else
    By troy.89 in forum 4-Tec Performance
    Replies: 29
    Last Post: 05-19-2010, 05:57 AM
  2. What else do I need to change on a 1200non pv
    By johnherr in forum Yamaha Old School Skis
    Replies: 3
    Last Post: 08-26-2008, 07:33 AM
  3. What else do I need to change on a 1200non pv
    By johnherr in forum Yamaha Open Discussion
    Replies: 0
    Last Post: 08-24-2008, 12:27 PM
  4. green wheel, what else do i need??
    By lextoy in forum 4-Tec Performance
    Replies: 6
    Last Post: 06-03-2008, 08:28 PM
  5. what else do i need ?
    By pet in forum 4-Tec Performance
    Replies: 10
    Last Post: 03-04-2008, 04:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •