Results 1 to 6 of 6
  1. #1

    Freedom star stop switch issue

    2002 polaris freedom 700 caburator, intermitant start stop switch fail to work while starting or stopping engine. Lanyard switch works perfectly. removed star stop switch and cleaned the contact. I suspect the lr-505 module, but difficult to test because it is intermitant everytime I try to begin the test its gets to work.

    I think to replace the lr-505 module
    where to start?


  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,569
    +1
    1,272
    You can bypass the LR-505 module for testing. Details via my signature links.

  3. #3
    I found bad connection in the wire from the switch to solenoid at solenoid. Could that be the problem because I don't understand that would cause a stop issue

  4. #4
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,569
    +1
    1,272
    Quote Originally Posted by y240z View Post
    I found bad connection in the wire from the switch to solenoid at solenoid.

    Could that be the problem because I don't understand that would cause a stop issue
    That would do it. The way the single Start/Stop button system works is that the Start button always tries to 'crank' the engine. The LR-505 module intercepts the start button signal from the solenoid coil and uses it to instead shut the engine down.

    Broken wire at the solenoid means the module would not see the signal from the Start/Stop button, and therefore would not know you were pressing it.

  5. #5
    could this be the issue with my freedom as well? The ski will not start or run with out holding the bilge button, and even then it will try to cut out. I've tried several batteries that I know r good.

  6. #6
    jackofalltrades's Avatar
    Join Date
    Aug 2010
    Location
    Cabot Arkansas
    Posts
    592
    Quote Originally Posted by s&n watersports View Post
    could this be the issue with my freedom as well? The ski will not start or run with out holding the bilge button, and even then it will try to cut out. I've tried several batteries that I know r good.
    I would bypass the LR module and see if it runs correctly.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 650sx start/stop switch issue
    By Ncp546 in forum Kawasaki PWC Performance (2-stroke)
    Replies: 4
    Last Post: 03-03-2014, 02:40 PM
  2. WTB: Sea Doo SP (95') Start Stop Switch ASAP
    By Hybrid AWD in forum Sea Doo Classifieds
    Replies: 3
    Last Post: 08-28-2012, 09:00 AM
  3. GPRXP Start/Stop switch modification
    By Hydrotoys in forum Conversion FAQ and Tips
    Replies: 28
    Last Post: 10-13-2010, 05:06 PM
  4. Polaris Freedom Star/Stop button problem
    By Polarisgo in forum Polaris Open Discussion
    Replies: 16
    Last Post: 05-28-2009, 02:03 PM
  5. Kawi 12F Oil Pressure Switch Issue
    By kauferlie in forum Kawasaki Open Discussion
    Replies: 1
    Last Post: 11-03-2006, 05:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •