Thread: work space
07-20-2011, 02:42 PM #1
How do you all do the work on these things?
i have 2 1998 GSX Ltd and the space around the engine is so cramped.
how do you get more useable space?
any ideas and thanks!
07-20-2011, 03:58 PM #2
- Join Date
- Apr 2011
- vancouver, bc
welcome to WORLD of WAteRCRAFT
don't know what it's like inside the GSX, but I can't imagine it can be worse than a polaris msx150.
07-20-2011, 05:28 PM #3
lots of cussing, bloody knuckles, fiberglass rash, and bending allen wrenches to make tight spaces, little mirrors, and once you figure out where the bolts are its a lot of blind wrench turning...what are you trying to do?
07-20-2011, 09:47 PM #4
07-22-2011, 09:35 AM #5
things like replace the fuel hoses and such!
I dont have the knowledge to do them all! but this weekend i will replace what i can reach!
07-22-2011, 12:19 PM #6
pull the air box off and the pull the carbs. you have to replace all the lines and clean the filter screens in the carbs or you are just wasting your time. in a GSX there is tons more room than a 96XP especially with a 951 in it....be thankful"
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By developerjj in forum Sea Doo Open DiscussionReplies: 0Last Post: 10-28-2009, 09:53 PM
By Hoovermaneuver in forum Open DiscussionReplies: 15Last Post: 10-06-2009, 11:34 AM
By throttlejunkie in forum Open DiscussionReplies: 4Last Post: 06-19-2008, 08:31 PM
By ph2ocraft in forum Polaris Open DiscussionReplies: 7Last Post: 05-21-2008, 07:15 AM
By meeper in forum Sea Doo Open DiscussionReplies: 11Last Post: 12-30-2005, 06:15 PM