Results 1 to 5 of 5

Thread: fogging motor

  1. #1
    wakejumper48's Avatar
    Join Date
    Sep 2010
    Location
    Florida
    Posts
    248
    +1
    3

    fogging motor

    i got an 04 rxp never seen salt water prob gonna take it to the beach with in the next couple weeks fogging motor is that something i should do after a ride in the ocean or just flush the exhaust and be done? only heard people fogging the 2 strokes haven't heard of any 4 stroke motors doing it
    just wondering..
    thxs


  2. #2
    Sturm215's Avatar
    Join Date
    May 2010
    Location
    Lakeland florida
    Posts
    1,893
    +1
    64
    do it. why not.. easy to do.

  3. #3
    WOT 88's Avatar
    Join Date
    Feb 2010
    Location
    Palm City, FL
    Posts
    1,147
    +1
    9
    I always do, I just pull of the hose going into the tb, hold the throttle wot (to prevent starting) and spray a bit of BRP lube in as I turn over the motor.

    I have a little piece of velcro that I use to wrap around the throttle lever and keep it to the bar.

  4. #4
    Sturm215's Avatar
    Join Date
    May 2010
    Location
    Lakeland florida
    Posts
    1,893
    +1
    64
    or spray while it's running till it slowly dies. and if you ocean ride alot id do it through the supercharger so you coat everything else.

  5. #5
    wakejumper48's Avatar
    Join Date
    Sep 2010
    Location
    Florida
    Posts
    248
    +1
    3
    sounds easy enough
    u said BRP lube or what ever use that over anything else or?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Fogging 66v power valve motor tip
    By kylechandler1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 11
    Last Post: 10-25-2015, 06:58 AM
  2. Fogging power valve motor tip
    By kylechandler1300 in forum 2-Stroke Performance
    Replies: 1
    Last Post: 09-05-2015, 04:50 PM
  3. Why you should fog your motor!!!!!!!!!!!!!
    By suck my wake in forum 4-Tec Performance
    Replies: 26
    Last Post: 08-03-2012, 03:10 AM
  4. Fogging 4tec motor
    By jcc011185 in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-16-2011, 05:52 PM
  5. adding external intercooler to 2003 gtx sc motor
    By rapidacceleration in forum 4-Tec Performance
    Replies: 12
    Last Post: 05-12-2005, 08:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •