Results 1 to 6 of 6
  1. #1
    jeffyp06's Avatar
    Join Date
    Jul 2010
    Location
    lake st clair, mi
    Posts
    93

    help with oil injection 01 gpr

    ive been looking around on the forum trying to answer questions to my gpr smoking quite bad, ive seen a few posts about the oil injection being stuck at wot, how can i check if this is my problem or how do i see if my oil injection is just out of whack? i seem to be having to add a gallon of oil per 2-3 tanks of gas filling up with 1/4 tank left... seems excessive...


  2. #2

    Join Date
    Jun 2011
    Location
    Locust Grove, VA
    Posts
    48
    Take that crap off and install the oil block off plate. These units are known for popping the oil line. You can prolly do it yourself, it just takes time. Switch to premix. Just my .02 cents. good luck!

  3. #3
    look down ontop of the carbys and when you squeeze the throttle trigger you will see a wheel turn to open the butterflys, one cable on the wheel goes to the throttle thrigger and the other goes to the oil injection pump, maybe check that short cable to see if its come off, sapped, slack? the oil injection pump is mounted on the front of the motor

  4. #4
    jeffyp06's Avatar
    Join Date
    Jul 2010
    Location
    lake st clair, mi
    Posts
    93
    that cable is fine and there is no way for me to see the oil injection mounted on the front of the motor without pulling the one part of the exhaust is there?

  5. #5
    jeffyp06's Avatar
    Join Date
    Jul 2010
    Location
    lake st clair, mi
    Posts
    93
    well after a tear down found out my oil injection was set at idle in between the idle and wot marks meaning it pouring oil in like it was running at half throttle. thanks for the tips guys

  6. #6

    Join Date
    Jan 2007
    Location
    Milwaukee, Wisconsin, United States
    Posts
    773
    +1
    1
    easy answer get block off kit. and go premix.. then no worries

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. need help with oil leak
    By cliff0413 in forum 4-Tec Performance
    Replies: 5
    Last Post: 03-07-2008, 10:45 AM
  2. Noob, needs help with oil.
    By Black_Bart in forum Kawasaki PWC Performance (4-stroke)
    Replies: 9
    Last Post: 07-31-2007, 07:32 PM
  3. need help with oil injection block off 2006 gp1300rs
    By MJE in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 07-06-2007, 11:34 AM
  4. NEED HELP! with oil pressure problem!...
    By Pale Rider in forum Sea Doo Open Discussion
    Replies: 55
    Last Post: 11-21-2006, 05:46 PM
  5. Help with oil level...
    By Pale Rider in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 11-04-2006, 11:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •