Page 1 of 11 1 2 3 ... LastLast
Results 1 to 10 of 103
  1. #1
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7

    Charger Advice Needed

    Ok... Starting a build in the next few weeks. Pulling the head and doing as follows:

    Port and Polish
    Ferrea Valves
    Springs and Retainers

    Bottom end work as follows:

    Bore 10 over and true cylinders
    Riva 9.5:1 +10 Pistons
    OEM Rods ( good to 400+ hp I was told)


    Reflash - maybe 9200

    Question is the charger and injector selection.... Not sure what route to go. Figured I would start with the mini rude as the X-Charger I have now isn't going to cut it IMO! Mini Rude perhaps. Seeing as it produced 14+ psi at 8550 and the 2 Rude puts out 15+ at the same rpm's. Not sure what the correct choice is for maximum performance. A 3Rude is a bit much I would think. Any suggestions? Thanks in advance.


  2. #2
    rmk82nd's Avatar
    Join Date
    Apr 2011
    Location
    Charlotte, NC
    Posts
    369
    +1
    4
    3 Rude def can't wait to install my riva valvetrain to get one.

  3. #3
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    Get the block and head decked. The XXX RIVA or ET140LE are great chargers, if you don't want to go 3RUDE. There is a differance you can feel between a Mini Rude and the these other chargers bottom to top.

  4. #4
    Sturm215's Avatar
    Join Date
    May 2010
    Location
    Lakeland florida
    Posts
    1,893
    +1
    64
    You will love the et charger. Guaranteed. Not to mention everyone hears that whistle from a mile away.

  5. #5
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Good Deal! Thanks

  6. #6
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    Just remember, more boost = more often adjusting slip.

    I went 40+ hrs before mine started to slip. Good luck with your build.

  7. #7
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,058
    +1
    790
    If you ride in rough water stay with a more proven SCer for those conditions. I Like the Mini Rude, XX Riva 2Rude or 140LE as they have proven great on slip for rough water conditions for me. A RACe ET or 3Rude, just to much Slip Adjustments.

  8. #8
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by troyheb View Post
    Just remember, more boost = more often adjusting slip.

    I went 40+ hrs before mine started to slip. Good luck with your build.
    That was one of the main reasons for posting this. I was unsure of which was best all around. From the looks of it, either an XX or MiniRude. The ET 140 is reasonable as well. I guess it is down to those 3.

  9. #9
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by troyheb View Post
    Good luck with your build.

  10. #10
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    Quote Originally Posted by MSRXP View Post
    That was one of the main reasons for posting this. I was unsure of which was best all around. From the looks of it, either an XX or MiniRude. The ET 140 is reasonable as well. I guess it is down to those 3.
    If I was buying a upgrade I think my choices would also be between those 3.

Page 1 of 11 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. OT: Advice needed - Divorce
    By Jeff C in forum Sea Doo Open Discussion
    Replies: 20
    Last Post: 03-29-2007, 10:39 AM
  2. Advice Needed help
    By mt375hp in forum Yamaha PWC Performance (2-stroke)
    Replies: 9
    Last Post: 09-01-2006, 07:19 AM
  3. Intake grate advice needed
    By Jeff C in forum 4-Tec Performance
    Replies: 10
    Last Post: 08-15-2005, 01:32 AM
  4. Holy Sh** , Advice Needed!!
    By sprchrgd89gt in forum 4-Tec Performance
    Replies: 10
    Last Post: 07-04-2005, 11:59 AM
  5. Advice Needed
    By Fuhreal in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 06-16-2005, 02:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •