Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16
  1. #1

    whats next...need recomendations

    i got an 07 rxp 215 with small mods sponsons, block offs, free flow exhaust, riva 3" air intake. my question is what should i go with next to get the best bang for my buck.
    intake grate? (riva or r&d?)
    solas impeller?
    pump wedge?
    i dont have a crazy amount of money to spend right now but i do have a little to work with and im trying to look to where to start or what is going to make the biggest difference for my setup> any opinions welcome


  2. #2
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    I say intake grate.

  3. #3
    Orlando Shark's Avatar
    Join Date
    Mar 2009
    Location
    Miami, FL
    Posts
    2,419
    +1
    10
    What type oftiding do you do?

    Smooth water: wedge
    Rough water: intake grate, either works well.

  4. #4
    check that i already have an intake great on the thing...jeez that was dumb. i mostly do rough riding though. is it worth putting a blow off valve on it ive been told its something the rxp does well with

  5. #5
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    Quote Originally Posted by rearviewneons View Post
    check that i already have an intake great on the thing...jeez that was dumb. i mostly do rough riding though. is it worth putting a blow off valve on it ive been told its something the rxp does well with
    Ok. Then a new prop. A wedge really wont help in rough water.

    No to the bov. Does not add performance, and its just another place for boost to leak.

  6. #6
    ok thanks for the help i think im gunna go with the solad 14/19 because that seems to be pretty standard for my setup. ive been thinking about moving over to a 4" air intake because i have been told that it makes a big difference even compared to the riva 3". im trying to figure out though where the intake tube goes into the 4" intake if you dont have a catch can and is it the same for the rear intake sytem?

  7. #7
    Quote Originally Posted by rearviewneons View Post
    i got an 07 rxp 215 with small mods sponsons, block offs, free flow exhaust, riva 3" air intake. my question is what should i go with next to get the best bang for my buck.
    intake grate? (riva or r&d?)
    solas impeller?
    pump wedge?
    i dont have a crazy amount of money to spend right now but i do have a little to work with and im trying to look to where to start or what is going to make the biggest difference for my setup> any opinions welcome
    I am interesting for a freeflow exhaust. Can you tell me about the noise levels? Can you compare the noise with a throughhull exhaust ( if any of your friends have?) As for a next mod i would save money for a SC (either a new unit or just a better wheel ) and, or an IC. Both options wil give noticeable power. In my ski i installed a wheel from the X model (by doing some modifications on the SC so as for the wheel to fit in) and installed a 4" intake. With stock ingectors and stock prop i noticed BIG differce. Better acceleration and +5 miles top speed. However did not notice any differce while changing from riva 3" intake to 4" (The 3" i borrowed for a couple of weeks). At least for the mods i have so far.

  8. #8
    szt8b7's Avatar
    Join Date
    Jul 2010
    Location
    Shreveport, LA
    Posts
    661
    +1
    6
    You need to buy or build a catch can. There is a thread here on how to make one, think I have about $30 wrapped up in mine.

  9. #9
    thanks for the help guys im starting to think maybe i should just save up my money a little bit and put an upgraded supercharger on over the winter. is it worth going x charger-42 or 50lbs injectors, fuel regulator. i think thats all i would need right and the perfomance gains would be pretty decent or should i just upgrade the wheel in the charger. Im not sure which one is going to be my best option

  10. #10
    smkondwtr's Avatar
    Join Date
    Dec 2010
    Location
    Lake Anna, Va.
    Posts
    199
    +1
    15
    Rearviewneons, if you haven't already, read my thread "What's missing on my 2010 RXP-X". I jumped in with a major rebuild last winter, but if you read carefully, you will find a lot of great money saving advise from the guys with experience who will tell you what works with what. A great example already given here.. NO BOV! You want a free 1mph, trim your reverse bucket. Good luck.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 06-21-2010, 08:07 PM
  2. need a new car what you guys recomend?
    By stingray152003 in forum Open Discussion
    Replies: 13
    Last Post: 05-14-2008, 09:30 AM
  3. 2006 RXP WHATS NEXT
    By DANNYA09 in forum 4-Tec Performance
    Replies: 4
    Last Post: 05-31-2006, 11:50 AM
  4. i need to know what i need to do next.
    By say bye in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 10-07-2005, 10:55 PM
  5. Whats Next;SC Impeller??
    By monsoon in forum 4-Tec Performance
    Replies: 17
    Last Post: 08-09-2005, 09:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •