Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: pulling engine

  1. #1

    Join Date
    Aug 2008
    Location
    redlake ontario canada
    Posts
    416
    +1
    3

    pulling engine

    i have diconnected all the electronics up front and placed them on the engine,i would like to pull the engine with all the electronics intact.it looks very tight but would i be able to leave the intake mani and the exhaust mani on when i pull the engine.thanx


  2. #2
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,059
    +1
    790
    Just take the 5 min. to pull off the intake mani.

  3. #3

    Join Date
    Aug 2008
    Location
    redlake ontario canada
    Posts
    416
    +1
    3
    so you figure to pull intake instead of exhaust.thanx

  4. #4

    Join Date
    Aug 2008
    Location
    redlake ontario canada
    Posts
    416
    +1
    3
    just took a look at it and yea you are right.hey you know the torx specs off hand for the intake mani.thanx

  5. #5
    three days ago i pulled out the engine of Rxp-x. removing intake mani. will take you a few minutes 4 or 5 bolts

  6. #6
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,059
    +1
    790
    Quote Originally Posted by darakuja View Post
    three days ago i pulled out the engine of Rxp-x. removing intake mani. will take you a few minutes 4 or 5 bolts
    9 total

    7 manifold
    2 Fuel rail

  7. #7

    Join Date
    Aug 2008
    Location
    redlake ontario canada
    Posts
    416
    +1
    3
    yea thanks i also have shit load of wires on the engine since i am changing over the hole elec system also.this will help out do to the fact i can get all this elec crap out of my way.thanx for guys help.thanx

  8. #8
    6 small engine ground wires .should i put them back in the same places ?

  9. #9

    Join Date
    Aug 2008
    Location
    redlake ontario canada
    Posts
    416
    +1
    3
    i notice by quick glance that i would have to remove 2 ground wires if i remove the intake mani.why woul i have to remove the 2 screws that hold the injectors in it seems to me that if unplug all connectors and remove the 7 bolts it should all come together.thanx

  10. #10
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by rjeffery View Post
    i notice by quick glance that i would have to remove 2 ground wires if i remove the intake mani.why woul i have to remove the 2 screws that hold the injectors in it seems to me that if unplug all connectors and remove the 7 bolts it should all come together.thanx
    Remove the fuel rail. It does two things: Removes the fuel and better allows you to maneuver the IM. Take it off before you break something.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What needs to be done to pull engine?
    By git_sum in forum Polaris How To & FAQs
    Replies: 7
    Last Post: 08-01-2011, 03:33 PM
  2. Help pulling engine
    By schmc5 in forum Kawasaki PWC Performance (4-stroke)
    Replies: 3
    Last Post: 12-16-2010, 12:58 PM
  3. Pulling engine
    By Muckafoonee in forum Polaris Open Discussion
    Replies: 17
    Last Post: 06-30-2009, 10:14 PM
  4. Pulling Engine on My SLX?!?!
    By TechSLX in forum Polaris How To & FAQs
    Replies: 14
    Last Post: 09-24-2008, 10:35 PM
  5. Getting ready to pull engine
    By 01xdime in forum 4-Tec Performance
    Replies: 33
    Last Post: 11-05-2005, 07:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •