Thread: Slx 780 popoff pressure
08-06-2011, 11:19 PM #1
Slx 780 popoff pressure
I finally started working on my 1996 SLX with boyesen pro reeds again. At wetwolf's suggestion, I put in 2.3 needle valves and 80 gram springs with factory jets. What would the popoff pressure be? All three are testing 16psi...
Also, is there any problem with routing the fuel selector petcock and separator backwards from the schematic in the shop manual
08-07-2011, 09:04 AM #2
By the chart, 2.3 and 80g works out @ 17 psi.
Don't really have a clue, but I'd guess having water separator BEFORE fuel selector would help prevent it from corrosion.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Ryan B in forum Yamaha Old School SkisReplies: 6Last Post: 08-10-2011, 08:52 PM
By cigarlust in forum Polaris ClassifiedsReplies: 10Last Post: 04-22-2011, 09:47 PM
By Sandell in forum 2-Stroke PerformanceReplies: 4Last Post: 09-03-2010, 05:28 AM
By Chris780 in forum Polaris Open DiscussionReplies: 2Last Post: 08-15-2010, 09:57 PM
By Chris780 in forum Polaris Open DiscussionReplies: 1Last Post: 08-15-2010, 09:56 PM