Thread: Exh mani tap for wideband
08-08-2011, 12:09 AM #1
Exh mani tap for wideband
I recall someone on the forum that does a good job tapping the exh. mani for an o2 sensor w/o hitting the water jacket and charges a nominal fee. Anyone have their contact info?
Also, where are you guys getting the best readings, tapped by the water fitting? Thanks.
08-08-2011, 12:17 AM #2
- Join Date
- Aug 2009
- Beaumont, Texas
its going to be close! I hit my water jacket, some 3 coats of jb weld where the water nipple goes and good to go, been running fine for about 50 hrs so far, knock on wood!
08-08-2011, 01:00 AM #3
08-08-2011, 01:08 AM #4
Nils at Rude performance is great with the J-Pipes. Charges 80.00 for labor. Rich at WFO is great at manifolds and charges $60.00 for tapping. The manifold needs to have the 693 casting and not the 692 as the water jackets are larger and harder to miss. I personally love the J-Pipe as it is easy to remove the sensor and it looks great as well. I borrowed one for the time being until mine is finished.
08-08-2011, 06:12 AM #5
08-08-2011, 06:40 AM #6
08-08-2011, 09:24 AM #7
I had no idea. What's the turn around time? Nils said 2-3 days. Hell of a price.
08-08-2011, 10:09 AM #8
- Join Date
- Jul 2007
- Montgomery, AL
I just did mine, I have a milling machine here at work. All you have to do is deck the boss to get it good and flat and i made a tool to center the hole and get it as far from the hose bib as you can and still have a full seal on the crush washer.
Drilled all the way through with a 5/8 and then most of the way through with a 21/32. No problem, but if you do not have a drill press with a vice i wouldn't try it. Everything has to be straight and square.
08-08-2011, 12:58 PM #9
Damn, I have a non X mani and an X exhaust.
08-08-2011, 01:23 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jpeconsult in forum Sea Doo ClassifiedsReplies: 6Last Post: 09-05-2011, 10:24 PM
By mikelytle1077 in forum 4-Tec PerformanceReplies: 6Last Post: 06-16-2011, 02:04 PM
WTB E/mani rxpxBy deansta in forum Sea Doo ClassifiedsReplies: 2Last Post: 04-25-2010, 11:16 PM
By hydrojunkie in forum Sea Doo ClassifiedsReplies: 10Last Post: 10-12-2009, 01:01 PM
By hydrojunkie in forum Sea Doo ClassifiedsReplies: 8Last Post: 01-11-2009, 10:51 AM