Thread: vts help
08-09-2011, 10:03 AM #1
does any body know , can i pull the vts motor by pulling the three nuts in the hull? or do u have to take it apart by the pump and pull it all thru the hull? my motor tock on water and rusted. i want to replace the motor
08-09-2011, 10:10 AM #2
- Join Date
- Jun 2010
- Toledo, Ohio
If all you want to replace is the motor, you just remove the plastic cover, unplug the motor and remove the 3 or 4 nuts holding the motor in place.
08-09-2011, 10:35 AM #3
i pulled the vts cover loosend the thre 10mm nuts and tryed pulling it out and it didnt move. this is a 1999 gsx if that makes a diffrence. its got rust on it,is there a werm gear behind the motor? thanks
08-09-2011, 04:25 PM #4
Yes there is a worm gear but one you have removed the retainers for the motor it should pull straight out. Maybe try spraying some penetrant oil on the studs.
08-09-2011, 06:40 PM #5
thanks guys if i new it was this easy i would of fixed it years ago! i brought it to a local starter shop and they rebuilt it for 20.00 dollars works like new.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By 1fastxpp in forum Sea Doo 2 Stroke SkisReplies: 0Last Post: 08-22-2011, 09:47 AM
By henn in forum 4-Tec PerformanceReplies: 6Last Post: 09-15-2010, 01:17 PM
By Sutphen115 in forum 2-Stroke PerformanceReplies: 13Last Post: 02-08-2009, 11:15 PM
By Gus13letter in forum Sea Doo ClassifiedsReplies: 0Last Post: 08-27-2008, 06:50 PM
By kp04rxp in forum 4-Tec PerformanceReplies: 4Last Post: 07-08-2008, 02:37 PM