Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,775
    +1
    400

    Twin Piped Virage

    looking to see what issues i would encounter doing this.i know the entire 700 exhaust would be scraped including the waterbox,would the 700 stator,cdi work with a 777 motor??? does the 777 require a different intake???


  2. #2
    Call Jay at Atlantic Powersports about a 777 crank and pipes.Stock CDI could be reburned by Randy at Watcom. 1-732-920-7669.ext 2 Ask for JayBird.

  3. #3
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,775
    +1
    400

    PIPES

    working on lining up a octane motor.i know the 700 waterbox won't work.will rob the collector and waterbox from the tx setup use it in the twin and cap on inlet on the collector,will take the new collector and enlarge the outlet and have tdr build a custom box for the tx with a matching enlarged inlet.have a setup of twin 40 keihins that are worked and reeds for it,still working on a black polaris twin head cover,will chop a cylinder off one i have if needed.already had randy in mind for the burn but i'm curious if a cdi setup for a 68mm stroke can be burned to perform correctly on a 70mm stroke??

  4. #4
    Connecticut CrazyA's Avatar
    Join Date
    Nov 2005
    Location
    CT.
    Posts
    8,134
    +1
    1,050
    Pro,
    I believe it can be reburnt to work. Give Randy a call. Also, keep in mind that the Center and PTO Virage pipes make more power than the Mag pipe, if it matters to you.

  5. #5
    We have twin head covers for the 700-800. If you look under the heading "these are the heads you have all been waiting for" you will see our 3-piece head, our 2 piece is identical minus one head of course. give me a call 315-343-6513--thanks Richie

  6. #6
    to make this a real sleeper you need one of our 910 motors, same as crazy;s 1350 matrix minus one cyl What do you think Artie? with virage pipes--this would be the matrix little brother.

  7. #7
    Connecticut CrazyA's Avatar
    Join Date
    Nov 2005
    Location
    CT.
    Posts
    8,134
    +1
    1,050
    Absolutely!!!

  8. #8
    Banned User
    Join Date
    Aug 2006
    Posts
    1,236
    Quote Originally Posted by TxPro1200 View Post
    already had randy in mind for the burn but i'm curious if a cdi setup for a 68mm stroke can be burned to perform correctly on a 70mm stroke??

    Check my original "Hurricane" thread.
    Randy has your back.

  9. #9
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,775
    +1
    400

    twin

    the twin setup would use the pto and center pipe

  10. #10
    Banned User
    Join Date
    Aug 2006
    Posts
    1,236
    correct.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RXP twin pipe system
    By Top banana in forum 4-Tec Performance
    Replies: 48
    Last Post: 02-20-2009, 07:25 AM
  2. Guys, HELP with factory twin pipes.
    By Water4fire in forum 2-Stroke Performance
    Replies: 2
    Last Post: 06-19-2008, 09:20 PM
  3. 800CC Twin Piped SLTX
    By ph2ocraft in forum Polaris Open Discussion
    Replies: 9
    Last Post: 05-20-2008, 04:25 PM
  4. Twin piped 951 X4
    By Gregscalade in forum Conversion PWC Performance Skis
    Replies: 29
    Last Post: 08-11-2007, 11:12 AM
  5. Twin Pipes
    By CrazyA in forum 2-Stroke Performance
    Replies: 9
    Last Post: 04-25-2007, 09:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •