Thread: Prop issues on my 06 rxp
08-11-2011, 04:47 PM #1
- Join Date
- Jun 2010
Prop issues on my 06 rxp
Hey guys i have an 06 rxp with a riva stage 1 kit with a steel wear ring i get prop spin out of the hole with the 14/19 prop i keep tweeking the prop and now have it at a 15/18 and still it spins out of the hole its turning 7840 rpm and 69-70 mph any suggestions
08-11-2011, 04:48 PM #2
Take the pitch back down to a 13.5/18 or so. Your carbon seal is going out. Ask me how I know.
08-11-2011, 05:36 PM #3
I get prop spin too new prop carbon ring speedfreaks bellow band new bearing etc if I roll 1mph nothing dead stop prop spin too. My prop to ring clearance is well within specs.
08-11-2011, 07:21 PM #4
08-11-2011, 11:23 PM #5
08-11-2011, 11:24 PM #6
08-12-2011, 01:55 PM #7
I have an 06 RXT that is experiencing the same thing. New prop. New Wear ring. Spins like a top. I've seen geriatric scooters move faster than my ski. I have a new carbon seal, hat, c clip and orings on order, along with a new bellows and a SFR BB. I've got 110 hours on it...but the lake is rough where I'm at, I'm in and out of the water constantly. I don't seem to be taking water on, but I'm topping at only 60mph on GPS.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By vspec1 in forum Sea Doo ClassifiedsReplies: 0Last Post: 07-30-2011, 05:35 PM
By skewman in forum Yamaha PWC Performance (4-stroke)Replies: 10Last Post: 05-31-2010, 08:57 PM
By dav_dman in forum Sea Doo ClassifiedsReplies: 4Last Post: 05-04-2010, 08:54 PM
By Jim-C180 in forum 4-Tec PerformanceReplies: 0Last Post: 04-28-2010, 08:36 AM
By ba6636 in forum 4-Tec PerformanceReplies: 8Last Post: 06-20-2008, 06:40 PM