Results 1 to 6 of 6
  1. #1

    taking gas out of my old rxp

    so early on in the summer i blew up my 2007 rxp 215 with almost a full tank of gas and since then i bought another 2007 rxp.....long story short im trying everything i can to get this gas outta here but every tube i have doesnt make the bend in the rubber gas hosing. Is there baffles or mesh in the tube somewhere? also i tried to take off the rubber hosing itself but the screw is facing the hull and there is noooo way i am going to be able to get a screw driver in there.


  2. #2
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Siphon it out or use an oil extractor.

  3. #3
    DaveC's Avatar
    Join Date
    Jun 2007
    Location
    Central Oklahoma
    Posts
    2,362
    +1
    41
    I found it the easiest to siphon out fuel with the fuel pump assembly removed, and at times that really did not really flow very well. You can use a small socket to remove the clamp if you want to remove the filler hose. And no, there is not any baffles or mesh used in the fuel system.

    As MSRXP posted, the oil extractor may be the easiest way to get the fuel out.

  4. #4
    mac_man_luke's Avatar
    Join Date
    Sep 2010
    Location
    South Australia
    Posts
    1,262
    +1
    22
    take the fuel hose off the fuel rail and put it in a container

    either keep putting the lanyard on till empty (long way) or rig the fuel pump up to run continuously.

  5. #5
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by mac_man_luke View Post
    take the fuel hose off the fuel rail and put it in a container

    either keep putting the lanyard on till empty (long way) or rig the fuel pump up to run continuously.
    You have to have a license to Rig shit up. Don't tell him to rig it up he's not qualified as they are strict in whom they give the licenses out to. It is hard to come across them.... Next thing you know, he will have his pump held on by duct tape and zip ties with a homemade prop.

  6. #6
    haah thanks for all of the help i was alble to get it out by manuvering a plastic tube without taking anything apart...it just took a very long time thanks gain!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Check out these pics of my old rectifier!
    By Mike94ZLT1 in forum 2-Stroke Performance
    Replies: 107
    Last Post: 06-06-2017, 08:07 AM
  2. Draining gas out of GTX 03 and RXP 04
    By Shogun1 in forum 4-Tec Performance
    Replies: 3
    Last Post: 06-25-2011, 08:36 PM
  3. What speeds can I expect out of my rxp and rxt?
    By luckyc1423 in forum Sea Doo Open Discussion
    Replies: 7
    Last Post: 11-07-2009, 04:32 PM
  4. I Backed Out of My Deal on My New 2007 RXP!
    By stepjl in forum Sea Doo Open Discussion
    Replies: 5
    Last Post: 09-10-2007, 03:17 PM
  5. R & D's Response to my Email about pulley kit, intercooler and keeping gas out of oil
    By ercBOOSTED in forum Kawasaki PWC Performance (4-stroke)
    Replies: 15
    Last Post: 08-26-2007, 12:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •