Results 1 to 3 of 3
  1. #1

    Join Date
    Jun 2011
    Location
    Locust Grove, VA
    Posts
    48

    Crank question...

    Does anyone know the tolerance in the crank? Working with the same 99 XL1200 limited. Had a guy measure it from top dead center of the pistons and at top dead center, doesn't matter which one you check there is about 3-4mm difference between the other 2. Does that make sense.....trying to explain it the best I can.

    Crank need replacing? or repaired? Still good?

    Any help or thoughts would be great.


  2. #2
    You should call crank works and ask them.............that way you don't get mixed answers.

  3. #3

    Join Date
    Apr 2006
    Location
    panama city beach 'fl
    Posts
    1,846
    +1
    9
    set piston #1 at TDC other piston 2 and 3 should be at same height as each other (- + .5mm
    if not crank is twisted

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Crank question
    By jabbas in forum Polaris Open Discussion
    Replies: 2
    Last Post: 04-09-2008, 09:49 PM
  2. Crank questions
    By pdxrealtor in forum 2-Stroke Performance
    Replies: 4
    Last Post: 01-30-2008, 01:27 AM
  3. crank questions
    By whiteyz in forum Yamaha PWC Performance (2-stroke)
    Replies: 13
    Last Post: 08-19-2007, 05:29 PM
  4. crank question
    By carl sagan in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 06-04-2007, 10:17 PM
  5. Fuji crank question
    By xlint89 in forum Polaris Open Discussion
    Replies: 6
    Last Post: 04-28-2007, 03:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •