Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: Test it today!!

  1. #1
    Matatan tocullo's Avatar
    Join Date
    Nov 2010
    Location
    VISTA AL RIO FL
    Posts
    1,725
    +1
    69

    Test it today!!

    I went to the lake today and did some tuning with my new set up. Here are the numbers. 12.1 idle , 13.9 mid and 11.9 WOT. Rpms at 8040 and running 76.1 on gps.
    I though that it was going to run a little faster, what you guys think? The prop I'm using is a skat 15/20 that it was touch but I don't know what is the actual pitch. Also I notice my boost a little under 10 pounds, does that sound right? ( autometer liquid filled)



  2. #2
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    Looks to be running pretty good to me in this heat.

  3. #3
    Matatan tocullo's Avatar
    Join Date
    Nov 2010
    Location
    VISTA AL RIO FL
    Posts
    1,725
    +1
    69
    Quote Originally Posted by jp1300r View Post
    Looks to be running pretty good to me in this heat.
    Good to hear. I have a ? I plug the bleed mod on my xs intercooler, do you think that i should open it?

    Thanks

  4. #4
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    Quote Originally Posted by tocullo View Post
    Good to hear. I have a ? I plug the bleed mod on my xs intercooler, do you think that i should open it?

    Thanks
    I always have run with one, so couldn't tell you if it makes difference. Guys claim it give you some more HP.

  5. #5
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    bleed mod cant hurt..you will go faster in the cooler weather..it is hot as balls and just as clamy down here right now..this is the worst time possible down here for speed..so dont stess..under 10 psi your speeds are fine in fla in august

  6. #6
    Matatan tocullo's Avatar
    Join Date
    Nov 2010
    Location
    VISTA AL RIO FL
    Posts
    1,725
    +1
    69
    Quote Originally Posted by breon View Post
    bleed mod cant hurt..you will go faster in the cooler weather..it is hot as balls and just as clamy down here right now..this is the worst time possible down here for speed..so dont stess..under 10 psi your speeds are fine in fla in august
    Thanks, will be doing the bleed mod this week.

  7. #7
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    Nice Numbers I also had good results I have a question for breon. I understand hot as balls what does clammy mean?

  8. #8
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Are your ride plate holes filled? If not, that is free speed right there... 1 mph at least. Glad to see you got the LC-1 up and working. I take it that it wasn't too hard to get dialed in....You are right on with the numbers. When it gets cooler, you will add 100-120 rpms therefore picking up another mph or so. Good luck with it...

  9. #9
    !!!! wave jumper !!!! 05_RXP's Avatar
    Join Date
    Jul 2011
    Location
    Hamilton, Ontario
    Posts
    513
    are you running a factory nozzle? ive been reading that guys are using the 81mm nozzles and pitching impellers to run 8150 and pickig up a mph or two

  10. #10
    Matatan tocullo's Avatar
    Join Date
    Nov 2010
    Location
    VISTA AL RIO FL
    Posts
    1,725
    +1
    69
    Quote Originally Posted by MSRXP View Post
    Are your ride plate holes filled? If not, that is free speed right there... 1 mph at least. Glad to see you got the LC-1 up and working. I take it that it wasn't too hard to get dialed in....You are right on with the numbers. When it gets cooler, you will add 100-120 rpms therefore picking up another mph or so. Good luck with it...
    Yep I have the ride plate holes filled. The installation wasn't that hard after all, thanks to you and some others!

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Speed results-02 xlt triple pipe testing completed today
    By Dirty Sanchez in forum Yamaha Open Discussion
    Replies: 4
    Last Post: 01-06-2007, 07:27 PM
  2. Test results today
    By Mark S in forum 4-Tec Performance
    Replies: 25
    Last Post: 05-18-2006, 08:16 PM
  3. OK guys I TESTED mods today and want your thoughts.
    By Water4fire in forum 4-Tec Performance
    Replies: 28
    Last Post: 05-11-2006, 10:31 PM
  4. I just had to buy it today.............
    By WATER WOODY in forum Yamaha Open Discussion
    Replies: 11
    Last Post: 02-27-2006, 11:36 PM
  5. Well I might be able to test it!!!
    By Water4fire in forum 4-Tec Performance
    Replies: 7
    Last Post: 02-17-2006, 08:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •