Results 1 to 8 of 8
  1. #1

    04 4tec s/c failure

    so the bearings all came apart desroyed the s/c and maybe motor the s/c gear broke and got stuck between some teeth in the flywheel. looking for a good s/c and possibly flywheel.
    thanks


  2. #2

  3. #3
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    You need to pull that engine apart first to see if you have anything left to work with as far as internals..... before you just buy, and toss on a new charger!

  4. #4
    ya its all out im taking it apart next but it has compression in all three turns smooth etc just gonna go ahead and check it all bearings bore oil pumps prob go ahead and do springs retainers etc

  5. #5

    Join Date
    Aug 2011
    Location
    Miami, FL
    Posts
    133
    good luck

  6. #6
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Quote Originally Posted by sr240 View Post
    ya its all out im taking it apart next but it has compression in all three turns smooth etc just gonna go ahead and check it all bearings bore oil pumps prob go ahead and do springs retainers etc
    More than likely all your critical internals will be fine... bottom end bearings, cylinder bores, cam, rockers, etc. The metal in the engine from your charger failure will more than likely trash your oil pumps, and housings... especially if you chipped gears off the charger and flywheel. If you find your front pump is trashed..... make sure you have your lower case vatted, and jet washed thoroughly as metal fragments get wedged tightly in the lower cavities and are hard to remove!!! While your in there..... replace those 04 exhaust valves as well.... they have been replaced with inconel valves that don't corrode up and sometimes drop like many 04-05 & some early 06's do.

  7. #7
    ya def will do the valves maybe upgrade springs etc and will be taking care of the pumps
    thanks

  8. #8
    sbt valves a good replacement?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 04 4tec help please
    By MeanDmax in forum 4-Tec Performance
    Replies: 1
    Last Post: 05-13-2010, 08:00 AM
  2. WTB: 04 4tec Cylinder head
    By rpmstepchild in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 08-18-2009, 08:19 AM
  3. Looking for 04 4tec block and crank
    By tweeker in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 09-29-2008, 12:28 PM
  4. 04 4tec stock manifold $45.00 shipped
    By marc777 in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 07-28-2008, 01:23 AM
  5. '04 oil pressure switch failure
    By RXP'in in MI in forum 4-Tec Performance
    Replies: 4
    Last Post: 08-22-2007, 10:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •