Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18
  1. #1
    !!!! wave jumper !!!! 05_RXP's Avatar
    Join Date
    Jul 2011
    Location
    Hamilton, Ontario
    Posts
    513

    good and bad chargers

    just wanted to start a thread to see how lucky or unlucky some guys have gotten with their chargers. i will start of buy saying i bought my 05 in 2009 with a brand new factory charger and 57 hrs on the clock. i am not sure if it was because the washers broke or they were just removed. right now i have just passed 199 hrs on machine so that would make 142 trouble free hrs on charger with out being touched. my x will be in on monday and once i get this factory charger out i will post up slip numbers. also to mention my machine ran 70-71 mph and 8100 rpm the last day of use.


  2. #2
    AtoMIC_OraNGE greenbullet's Avatar
    Join Date
    Jul 2010
    Location
    Barrie / BuckHORN Ontario
    Posts
    2,509
    +1
    234
    pull it apart and show all of us how the bearing cases will be craCKED and ready to drop out haha .... get that x in there and toss the stocker ober your shoulder

  3. #3
    h2jim's Avatar
    Join Date
    Nov 2008
    Location
    Ontario Canada
    Posts
    2,063
    +1
    61
    Buy my ET 137!

  4. #4
    Work Harder, Millions on Wellfare Depend On Us! ultramaxracing05's Avatar
    Join Date
    Aug 2009
    Location
    Beaumont, Texas
    Posts
    2,999
    +1
    123
    the rebuild time is 100 hrs dude, you better get some new bearings in that thing!

  5. #5
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by h2jim View Post
    Buy my ET 137!
    How much on the 137? Is it the new version Art put out a few months ago?

  6. #6
    Moderated
    Join Date
    Oct 2006
    Posts
    3,711
    my et race LE lasted 5 hours before it touched down.....

    my ckit last 25 hours in heavy rough water use before it also let go and suffered major touch down....

    got a rude2 now with 20 minutes on it, lets hope it lasts longer then the others i have had.

  7. #7
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Quote Originally Posted by izz0 View Post
    my et race LE lasted 5 hours before it touched down.....

    my ckit last 25 hours in heavy rough water use before it also let go and suffered major touch down....

    got a rude2 now with 20 minutes on it, lets hope it lasts longer then the others i have had.

    EEEEK!

    Ran my 08 born C-kit for 15 hrs with no issue.

    Got about an hour on my ET race........ hopefully I can stretch it longer than 5hrs.

  8. #8
    Fastest in my cove sfackett0's Avatar
    Join Date
    Aug 2007
    Location
    Sparrows Point, MD (near the Key Bridge)
    Posts
    1,000
    +1
    22
    05 RXP - got 50 hours on my stock charger with ceramics, then another 50 with riva's. Now im at 15 hours with an X charger..... yea i never get to ride anymore

  9. #9
    Moderated
    Join Date
    Oct 2006
    Posts
    3,711
    Quote Originally Posted by Sayers View Post
    EEEEK!

    Ran my 08 born C-kit for 15 hrs with no issue.

    Got about an hour on my ET race........ hopefully I can stretch it longer than 5hrs.
    if my et charger has been built using viton seals it never would have touched down....the ckit i was lazy with and did not check it properly every 10 hours or so and i hammered it bad...problem was i took it away with me and took every tool i could think of cept my sc tools and torque wrench...as you can see i have myself to blame for the ckit but to be fair, by fuck it was a wonderful 25 hours

  10. #10
    mstennes's Avatar
    Join Date
    Jul 2006
    Location
    On the Columbia River above a Dam
    Posts
    843
    +1
    1
    I have a 2Rude and 3 X chargers, I pull them every winter and have Jerry go through them reguardless of hours but none ever get over 75. I just don't feel like dealing with them or a failure in our short riding season.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Yamaha - what's good and bad about the new FX HO?
    By Macster in forum Yamaha PWC Performance (4-stroke)
    Replies: 4
    Last Post: 06-14-2011, 05:21 AM
  2. 2009 fzs good and bad
    By hydrojunkie in forum Yamaha PWC Performance (4-stroke)
    Replies: 3
    Last Post: 05-30-2010, 04:38 PM
  3. RXT Mods Tested - Good and Bad News
    By Throttlemire in forum 4-Tec Performance
    Replies: 5
    Last Post: 06-25-2009, 09:44 AM
  4. Good And Bad day
    By gpr_redneck in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 10-06-2007, 07:23 AM
  5. Riva Wedge Results Good and Bad
    By excess in forum 4-Tec Performance
    Replies: 16
    Last Post: 06-19-2006, 09:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •