Thread: tripple PUMP!!
12-22-2006, 03:46 PM #1
just got my tripplr outlet fuel pump from beerdart!!! WOOOOHOOOO
anyway when you are installing it you leave the top rack of lines connected and how it was. and then you undo the two fuel lines on the bottom....
But on the second carb do you hook it up to the left plug and leave the right side open???? or do you have to plug it up and what should i use if i have too?? and if anyone has some pics of there tripple outlet setup that would be Great!
btw i do have the diagram that i got from ph2o's gallery
12-22-2006, 04:11 PM #2
You will need to plug them up. Make sure you use someting disigned for fuel use. DO NOT use regular vaccum plugs, because they will leak.
12-22-2006, 04:28 PM #3
03-13-2007, 10:01 PM #4
03-13-2007, 10:46 PM #5
In the picture above I used the plugs out of a fuel primer kit, solid fuel line and a couple of injector clamps. If you look just above the shop towel you can see my plugs, I purchased those from Randy at Watcon or Brian at Ultimate, I don't remember which.
What's not showing in the photo are the plugs blocking the old injection nipples. Mercedes diesel return line plugs are the answer. They are 3.2mm braided line and should last roughly 10 years.
Last edited by ph2ocraft; 03-13-2007 at 10:51 PM.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By gorilla03 in forum Polaris ClassifiedsReplies: 7Last Post: 01-16-2009, 08:53 AM
By Gadjet in forum Polaris How To & FAQsReplies: 6Last Post: 07-02-2008, 08:43 PM
By mkulczyckyj in forum Polaris Open DiscussionReplies: 3Last Post: 04-20-2008, 10:28 AM
By mboley in forum Polaris Open DiscussionReplies: 13Last Post: 03-04-2007, 07:59 PM
By Sunfunzoom in forum 4-Tec PerformanceReplies: 24Last Post: 02-13-2006, 06:28 PM