Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 40
  1. #1
    I suffer from waverunneritis!!!! PWCManiac's Avatar
    Join Date
    Nov 2006
    Location
    Miami, Florida, United States
    Posts
    453
    +1
    1

    Talking SUGGESTIONS on HOLE SHOT KIT???



    Ok, so I just recieved the hole shot kit from IslandRacing. I also received the D-plate which everyone tells me I should install too. The diagram I recieved from IslanRacing unfortunately is very poor. It looks like chicken scratch. (No hard feelings towards IslandRacing, they're very good.) However I don't think the insatllation instructions are professional at all. I have hands on experience & I'm not afraid of anything when it comes to these 2 stroke engines but any help is greatly appreaciated. I want to make sure I get things done correctly.



    By the way, MERRY CHRISTMAS!!!


  2. #2
    Ill admit it isnt the best diagram but it is pretty explanatory. Were here to answer any tech questions you may have during the install. Give me a call during the install if you have any troubles.

  3. #3
    Hydrotherapy's Avatar
    Join Date
    Sep 2006
    Location
    The Rock
    Posts
    3,363
    +1
    17
    look through the how to section i am sure there is a pdf file for how to fit jet works..if not pm me your e mail and when home will e mail you the file i have..would do now but at work now got to love xmas day at work

  4. #4

  5. #5
    I suffer from waverunneritis!!!! PWCManiac's Avatar
    Join Date
    Nov 2006
    Location
    Miami, Florida, United States
    Posts
    453
    +1
    1

    Thumbs up

    Thanks guys... Once again, u guys save the day. Both versions are very helpful. I look forward to begin taking the exhaust apart this upcoming Friday.

  6. #6
    XL1200Ltd-Keith's Avatar
    Join Date
    Aug 2005
    Location
    Arizona
    Posts
    506
    The water temp sensor should be tapped for a 10mm X 1.25 pitch, as corrected in this diagram. Thanks for catching this Osidebill!

    Last edited by RX951; 12-25-2006 at 11:00 PM.

  7. #7
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2
    Keep in mind if you havent done tapping before a local Napa or someone like that does it fairly cheap. I paid $15 for both holes.

  8. #8
    I suffer from waverunneritis!!!! PWCManiac's Avatar
    Join Date
    Nov 2006
    Location
    Miami, Florida, United States
    Posts
    453
    +1
    1
    That sounds good to me. I plan on buying the tools so I can tap it myself. Plus I have a friend that can help me. I need to do the tapping on the exhaust & also on the 5 degree GPR nozzle I just received. 8 holes in total. Thanks dude.

    Quote Originally Posted by mrbtd View Post
    Keep in mind if you havent done tapping before a local Napa or someone like that does it fairly cheap. I paid $15 for both holes.

  9. #9
    I suffer from waverunneritis!!!! PWCManiac's Avatar
    Join Date
    Nov 2006
    Location
    Miami, Florida, United States
    Posts
    453
    +1
    1

    Question Running on idle too long...

    Alright guys, the main reason I've brought this thread back up is because I need help. I understand that the jetworks mod works by not allowing the water in during idle so when u punch it, it rips out of the water with more power. Does this mean that if I idle too long I can risk overheating the engine? I'll give an example. I travel to Naples 3-4 times a year & teh bay there is mostly all idle speed & it can take between 20-30 minutes to get from the resort I stay at to the Gulf. Is this a factor???

  10. #10
    MR. SCOVILLE UNIT SUCKMYWAKE's Avatar
    Join Date
    Aug 2005
    Location
    ASTON, PENNSYLVANIA
    Posts
    2,836
    +1
    8
    i've been in no wake zones for 20 minutes and never had a problem. i doubt that you will either

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. hole shot kit from island racing
    By FZR N in forum Yamaha PWC Performance (2-stroke)
    Replies: 26
    Last Post: 10-30-2010, 01:01 PM
  2. Help with severe cavitationn on hole shot
    By poleski in forum Yamaha PWC Performance (4-stroke)
    Replies: 3
    Last Post: 07-24-2010, 08:10 PM
  3. Island Racing Hole Shot Kit
    By eurokidlt in forum Yamaha PWC Performance (2-stroke)
    Replies: 53
    Last Post: 08-31-2009, 09:32 AM
  4. hole shot kit 05 1300r
    By steven1300r in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 01-18-2008, 01:55 AM
  5. island hole shot kit??
    By born riding in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 10-24-2007, 11:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •