Thread: 08 waterbox and midpipe MOD
09-01-2011, 07:52 AM #1
- Join Date
- Aug 2011
- Miami, FL
08 waterbox and midpipe MOD
I had a question about this conversion. I already installed the 08 waterbox and 08 midpipe in my 06 RXT.
My question is the following:
Where do the hoses go from the old J pipe setup. I have an inlet in the waterbox, an inlet in the 08 midpipe, and an inlet in the exhaust manifold.
I have a hose coming from the pump housing that I think should go into the waterbox but I am unsure of the two inlet on the midpipe and exhaust manifold. Has anyone done this conversion?
Any help is greatly appreciated
09-01-2011, 08:01 AM #2
My 08 goes:
pump -> intercooler -> exhaust manifold front bottom -> top back exit on exhaust manifold splits to mid pipe and water box
bottom back exhaust manifold outlet goes to flush port on pump shoe
09-01-2011, 12:05 PM #3
The hose coming from the pump that went to top of your j pipe in the bend is the flush line. I run that to the bottom fitting on the exaust manifold. The top fitting on the exhaust manifold will go to the mid pipe. This is how I run mine and it has worked good with no troubles for 2 years.
Didn't know there were 2 threads until now.
Last edited by Scotty; 09-01-2011 at 12:09 PM. Reason: 2 threads
09-02-2011, 05:01 AM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By usaf_mike in forum 4-Tec PerformanceReplies: 15Last Post: 09-01-2011, 12:23 PM
By GreenMonster in forum Sea Doo Open DiscussionReplies: 2Last Post: 08-22-2011, 08:42 PM
By GreenMonster in forum Sea Doo ClassifiedsReplies: 5Last Post: 08-12-2011, 07:59 AM
By GreenMonster in forum Sea Doo ClassifiedsReplies: 0Last Post: 08-10-2011, 11:17 AM
By mxl16 in forum Sea Doo ClassifiedsReplies: 3Last Post: 03-09-2010, 12:43 PM