Results 1 to 5 of 5
  1. #1
    I finally got ONE!!! ;) RXT-260-DOO's Avatar
    Join Date
    Jun 2011
    Location
    Hot Sulphur Springs, CO
    Posts
    295
    +1
    26

    Maint Required @ 21 hours???

    So I was out at Lake Powell over the weekend and was riding through some pretty rough stuff and my wrench light came on at around 21 hours. From what I see, there is no maint required at this interval so why would it have come on? From the rough water???

    TIA, Oh yeah, 2011 RXT...

    Jeremy


  2. #2
    jpeconsult's Avatar
    Join Date
    Jul 2007
    Location
    Pineville, LA
    Posts
    5,448
    +1
    1
    Im not sure what the "wrench light" means, but i assume it needs some attention. Double check oil and coolant levels then put a screwdriver on all hose clamps to make sure everything is snug.

    Be patient, and someone with a newer ski should chime in. --Jeremy

  3. #3
    Madmike1's Avatar
    Join Date
    Jul 2011
    Location
    Vancouver WA
    Posts
    153
    +1
    2
    Is the maintenance light still on after you shut it down and restarted? What fault code is it showing.... if the fault is still active you can press the mode button repeatedly until fault mode is displayed and then press the set button to see what code it is throwing.

    If it is not still throwing a code, you might need to take it to the dealer to have the ECU read to see if it stored a fault code.

  4. #4
    I finally got ONE!!! ;) RXT-260-DOO's Avatar
    Join Date
    Jun 2011
    Location
    Hot Sulphur Springs, CO
    Posts
    295
    +1
    26
    No codes, just the wrench which means "Maintenance Required". If something was wrong it would have the engine light lit up. I am thinking it just tripped and theres nothing to worry about... except that to get the lit up wrench off I have to take it to the dlr and have them clear it...

  5. #5
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    The dealer did not properly set it up. When you go to program one you have to reset the maint even when it does not have anything on it. I don't know why but have sent a couple out like that and learned we needed to reset the maint light when we tear out a new one. T It is not having a maint issue and it is not taking on water. Have a good ride.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Maint Required 'Wrench' came on and felt some bogging later
    By Lstorm2003 in forum 4-Tec Performance
    Replies: 4
    Last Post: 07-26-2016, 09:10 PM
  2. FS 2008 fx sho cruiser 21 hours
    By porschemaniac in forum Yamaha 4 Stroke Skis
    Replies: 4
    Last Post: 06-27-2014, 04:11 PM
  3. Replies: 5
    Last Post: 04-15-2013, 06:37 PM
  4. What's included in a 65 hour Maint check?
    By Bruins in forum 4-Tec Performance
    Replies: 4
    Last Post: 09-30-2007, 08:39 AM
  5. 50 hour maint?
    By mxl16 in forum 4-Tec Performance
    Replies: 0
    Last Post: 10-14-2005, 04:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •